Ive managed 2 change the parameters now slowing the rapaid speed by 1000 but it still comes up with the error msg.... Do you think the z axis motor is on its way out!?
Type: Posts; User: foolmaker
Ive managed 2 change the parameters now slowing the rapaid speed by 1000 but it still comes up with the error msg.... Do you think the z axis motor is on its way out!?
It only seams to happen when rapiding down or up in Z axis at 100%. Ive been told I can slow this down by changing the parametrers but Im not sure how to excess them, or which ones to change! Can you...
Hi-there
I keep getting the error msg
GROSS POSITIONING ERROR Z C
followed by the rset of the sceen being filled with lists of letters and numbers, are...
I sent my Mentor 2 drive away before you posted your msg, but they did find a few faults with it which has now been fixed.
So the machine now stops using m25 and m5 and does not trip the drive......
ok thank-you Mark, I will give them a ring and go from there.....
I have a series 2 intract 4 with TNC 2500 control, everythings runs fine untill I call a M25 comand, then spindle drive fault occors which also trips the machine controler (mentor 2). (if stoping the...