I just wanted to say what an absolute pleasure it is to deal with Marco @ LightObject!
I am building a laser and he has been great to deal with!
Thanks!
Matt
Type: Posts; User: 8548matthew
I just wanted to say what an absolute pleasure it is to deal with Marco @ LightObject!
I am building a laser and he has been great to deal with!
Thanks!
Matt
Hello,
I am importing a dxf into cad.
The drawing has an arrangement of .25" holes.
The tutorial says that a pattern would automatically be generated.
This is not happening. what am I doing...
Hello,
Thank you Dean, Cinamatic and Dennis.
This exactly what I needed to know.
Now I can investigate why I am not getting these results.
Again, Thanks!
Hello, I am running a 40w replacement bulb (brand new)and was told not power it past 17-18 mA.
Everything I read suggests I should be able to cut 3mm Acrylic in one pass at a fair amount of speed...
thank you for replying. Unfortunately that is not the issue.
It is strange, because the exterior cuts are over by .040
and the interior cuts are under by .025. I calibrated the motors over a span...
I have been helping a friend set up a Chinese machine.
Have replaced drivers and controller.
Running Mach 3 with drawing and code produced with V-Carve.
The problem is that the part (attached) is...
I have not been to this thread in a while. I purchased a machine from George quite some time ago. I have read threads critical of George. Some of these issues may be valid and yes I had a few myself....