Find a shop with a ram type EDM machine and have them put your slot in for you, and at the same time they will disinigrate the broken drill.
Type: Posts; User: DJPLAST
Find a shop with a ram type EDM machine and have them put your slot in for you, and at the same time they will disinigrate the broken drill.
Place the "STANDARD" in the micrometer and measure it (your own "FEEL" is very critical here). To adjust, use the spanner wrench and rotate the "TUBE" that is inside the spindle. This would be the...
A simple phone call to your insurance carrier (workers comp) will straighten managment right up. They will probably tell you that any time some one walks out of the office into the shop, THEY WILL...
What version? MC9 the procedure is: Menu: SCREEN .. Change Levels .. pop up .. copy .. choose level to copy to .. choose what you want to copy and . Done
Try this. No air required. Don't have to climb up on top of the head of the machine. Here is the web site.
http://www.royalprod.com/product.cfm?catID=11
What version are you running? Right click,then attributes, then choose. Ver 21
http://www.mosler-safe.com/index.php?id=11
Draw your own tool in the tool set up.
I think that what you are seeing is the result of or not understanding that the circle "STARTS" at the 3:00 o'clock position and "ENDS" at the 3:00 o'clock position. When you trim the circle on the...
You need to recheck some numbers from that sketch. 10" - 9.290 = .710 . You have a "groove" on either side of center that are shown as .710" . The math is not correct somewhere. Probably the 9.290"...
How small (or large) is this machine? Are you sure it is an "EMCO" or is it possibly Impco? What is the tonnage / shot capacity? Mold size capability? Plunger or screw on the injection end? Hydrulic...
You a correct, it did the same thing for me. I created the arc in the "front" view with the points given. Then I selected the arc in the "TOP" view and moved it to a new x y location, and when...
Go watch the news and see all those "UNION WORKERS" from the big three getting laid off. Not many places will hire someone that has been installing lug nuts onto studs at $30-$40 per hr for the last...
I just drug a solid cube while I was in the "TOP" view and moved it to the top right quadrant. The "Z" position did not change but the x and y did.
I don't know if this answered your question.
It looks like the guys have missed an obvious point. To remove the chuck "arbor" you will need to loosen the draw bar at the top of the spindle. That would be the hex at the top of the mill. Unscrew...
MattTheNoob
What an inovative and absolutly breath taking move! That must have put a knot in your stomach at least once during the move! You got to have some huge cajones "to get er done" in such a...
Use a smaller cutter!
Have you ever run an EDM before? There are 3 things to remember about EDMing.
1. Flushing
2. Flushing
3. Flushing
You must keep the dielectric in the cut in order to do any burning!
How is...
Uncheck the "ref pt." on the "tool parameters" screen. or change the x10, y10 z10 to x0,y0,z0 in the "ref pt". It is probably set to the 10" dim.
Since Ben & Jerry's are thinking about a new product using human breast milk, I think the components to this formula will be hard to get (short supply)! Look for something else.
The jog controls are on the small panel attached to the machine itself.
There are three main things to know about EDMing.
1. Flushing
2. Flushing
3. Flushing
If you do not have a clean gap this...
Acetone
Do you have the tanks that go with the extruder? You will need tanks about 10 feet long, maybe two of them back to back. You will need a puller at the take off end after the tanks. The tanks will...
Invest in a nice pallet jack, you will find it very handy!
Can you show a picture of it?
Here is another source for graphite:
http://www.poco.com/Home/tabid/36/Default.aspx
The folowing of the straight line sounds like you are picking the geometry at the wrong end. When you choose the geometry to cut, does your arrow go clock wise or counter clockwise? This determins...
OOps I think I sent the wrong file. I think this is the correct one.
I don't have MC8, But I did cut the white areas in MC9, using the pocket parameters. Here is the G code:
Just burn the center core of the tap out with a copper tube in the handy dandy EDM.