507,923 active members
3,632 visitors online
Register for free
Login

Search:

Type: Posts; User: maver1ck

Page 1 of 13 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    3
    Views
    93

    The BIOS needs to be configured for the specific...

    The BIOS needs to be configured for the specific drive you are using so can't tell you what you would need to use. You would need to look up the drive specs for what you have and enter them.
  2. Replies
    2
    Views
    20

    Based on your description, RT bios seems most...

    Based on your description, RT bios seems most likely since it occurred after sitting idle for a while. A battery at 3v should have been able to maintain this, but it happens occasionally. I have...
  3. Replies
    3
    Views
    14

    Look in your programming manual at G83. Using a...

    Look in your programming manual at G83. Using a K word sets a variable depth per peck. I believe it only has 3 stages though (3xK for first peck, 2xK for 2nd peck and 1xK for all additional.
    A J...
  4. Replies
    3
    Views
    93

    Some of the WS board BIOS do have limitations on...

    Some of the WS board BIOS do have limitations on hard drive size, others can be manually configured for larger drives.

    But one of the most common issues is modern operating systems will...
  5. Thread: ATC Arrow 750

    by maver1ck
    Replies
    4
    Views
    410

    Re: ATC Arrow 750

    Its hard to give you solid answers with all the unknowns here. There were several different software versions for the different machines/years, and many of them would not be compatible across the...
  6. Replies
    8
    Views
    370

    Re: x axis grd align failure!

    Those switches don't last forever, and although the most common issues I've seen is for it to start sticking because of residue on the switch, eventually the internal mechanism will start to have a...
  7. Thread: rapid move

    by maver1ck
    Replies
    7
    Views
    113

    [QUOTE=tspiszak;2305482]Hi Mike, do u know how...

    [QUOTE=tspiszak;2305482]Hi Mike, do u know how to get rid of this message.? It pops out every time I switch between screens. 423394

    That alarm indicates you've changed the hard drive but the...
  8. Replies
    6
    Views
    1,420

    Re: Vickers 2100 won't boot, scrambled screen

    The quote you posted says how to contact me.....Send a PM. Depending on which board you have (and your ability level), this could be a simple fix, or it could require you to send the board out for...
  9. Replies
    2
    Views
    218

    I have various way covers but most of them are...

    I have various way covers but most of them are for 1250-2000 size machines. The only one I have that might fit your arrow 750 is on a 1998 Arrow 500. I haven't powered this machine up in a few years...
  10. I am not one to just swap components around, so I...

    I am not one to just swap components around, so I can't really speak for interchangability between the spindle drives.

    I do know there were substantially different parameter sets for the standard...
  11. Replies
    4
    Views
    365

    I can reflash the BIOS and do it regularly on...

    I can reflash the BIOS and do it regularly on site for local customers, or companies send the boards to me to do it and ship it back to them.

    The only other official support I know of is Siemens...
  12. Because of the high torque spindle, there is a...

    Because of the high torque spindle, there is a 2:1 reduction on the belt drive. When the motor orient's, it doesn't know whether it is on rev 1 or rev 2 of the spindle so there is a prox switch that...
  13. Thread: error

    by maver1ck
    Replies
    3
    Views
    259

    Means the axis was out of position, either moved...

    Means the axis was out of position, either moved further than expected (i.e. runaway axis) or didn't move as far as expected (i.e. motor power cable is disconnected).

    These are the two extremes,...
  14. Re: Milacron Cintimatic 5VC-750 - Power Up Issue

    It seems like the better person to ask is the person who owns the machine.

    My guess is it died and he wasn't willing to spend the money fixing it. If that is the case, it is not something you can...
  15. Replies
    4
    Views
    365

    Re: acramatic 2100 want boot

    Did the alarms start before you replaced the batteries or after? If immediately after, then its pretty clear the BIOS on the WS and RT boards is at fault. If the alarms were coming up first and you...
  16. Re: CMOS/ BIOS settings for work station board

    Sorry for the delay but for some reason account had to be reverified before it would let me do anything, but they didn't inform me of that so I was locked out for weeks trying to get it sorted.
    ...
  17. Re: CMOS/ BIOS settings for work station board

    If you still need the config for your WS board send me a PM with an email address and I'll send you the configuration.
  18. Replies
    4
    Views
    233

    You manually set the Tram using the Pendant at...

    You manually set the Tram using the Pendant at whatever height you want to set tools off from.

    I believe it is under Tool Setup, then press "set tram" (you may have to press "more on pendant for...
  19. Replies
    11
    Views
    402

    Re: nada en el arranque

    On that vintage, if you can't get any video output from the WS board with a known good external monitor it sounds like the board is not passing the POST.

    The fact that your pendant lights up,...
  20. Replies
    0
    Views
    363

    Re: acramatic 2100 load problem

    If the repair disc didn't work, then as I suggested earlier, your best options are to send the drive out to be repaired or to purchase a replacement. I only know of a few companies that can reliably...
  21. Replies
    10
    Views
    681

    BIOS settings could prevent your hard drive from...

    BIOS settings could prevent your hard drive from being recognized but then it should fail immediately after the BIOS screen and shouldn't actually start loading.
    Send me a PM with your workstation...
  22. Replies
    0
    Views
    363

    Based on your reply I'm not sure whether you are...

    Based on your reply I'm not sure whether you are saying you have the NT repair software needed or not. If you don't have the NT repair disc specific to the version of Windows on your hard drive, this...
  23. Replies
    0
    Views
    363

    Re: acramatic 2100 load problem

    I can't walk you through this procedure as I don't know your ability level, what hardware you have access to, or even what software version you have/need (the machines did not come with software to...
  24. Replies
    10
    Views
    681

    Re: Acramatic A2100 bios/cmos

    Glad to hear you've made progress, sorry to hear you hit another issue. Stalling at OS loader sounds very likely that the hard drive is the next issue. Is there any chance the hard drive was removed...
  25. Replies
    11
    Views
    402

    Re: nada en el arranque

    It looks like you have one of the older machines that uses a standard CRT monitor. If you power up with an external monitor plugged directly into the video connector on the WS Board does it do the...
Results 1 to 25 of 307
Page 1 of 13 1 2 3 4