Search:

Actually it works now hehe, I noticed now when I downloaded a program and try to run it it waited for comunication so I just started the serial transfer again and then it works :D
Using serial to...

Hello!

I´m trying to get this controller to drip feed and by reading some threads here on cnczone I have found that G127.5 should be on and I found in the ladder that D400.0 set G127.5 and I then...

I also tried Freecad which seem to have the dimensioning capability.

Thanks that is a good suggestion.

Fusion is great and we already have a license for that but it's not suitable for the slow pc on the laser cutter.
I haven't tried deltacad but both libre and qcad seem to not have the dimensioning...

Hello
I´m looking for a low price 2D CAD program to draw simple designs directly on the laser machine computer, the only requirement is that its possible to first draw the design and then dimension...

Just to clarify:
Diagnostic 480, at least on my machine.
See picture of how it look here when on.

Well you can delete the M6 commands in the gcode if there is a plc program for atc loaded, maybe there isnt, try run M6 T2 in MDI for example and see what it does.
If there is you can probably reach...

Are the manuals accurate for this model? there is too much on this controller that is not the same in the manual and we want to be able to sell this to our customers so it need to be good.

Well the reason I made the question was that I could not find it so your flippant answers seem rather unnecessary.
As it is solved then there is no need to continue this conversation.

Its easy to find the controller on their web site: https://www.szghtech.com/cnc-controller/cnc-lathe-controller/atc-4-axis-milling-controller.html
And I have the manual.
The buttons change when...

The question was how to do it on this controller, not what to do in general terms :)

Its not a lathe control, and the manual is not that good, it often just state what it says on the screen over the F buttons in not so good english and the F buttons have a hundred different funktions...

I´m not sure what you mean, the G53 coordinate system is the machine coordinate system and it is from that system the offset to G54-G59 is set.
A move to a G53 position does not have to be a rapid...

https://www.cnczone.com/forums/attachment.php?attachmentid=480552&stc=1
I found this button now under Settings / coord / right arrow and it does approximately what I want, if I zero the axis first...

Thank you but its not how the coordinate system work that I need explained its how to set it conveniently, in my opinion its not a convenient way to use a calculator to calculate how much I need to...

Can you set it like I described? or do you mean you can set g54 for example to an offset realtive the home switch?
This setup button, is it a physical button you have? cant seem to find anything...

Yes I know that, that is not the questions, the question is if there is a convinient way to set the relative coordinates as I described "Normally for low precision work I just move the endmill to the...

Yes of course, but the question is if its possible to set it to something else than zero.
Normally for low precision work I just move the endmill to the edge of the workpice and then set X for...

B015.0 to 0 solved the home again problem (remember zero point)

For the set X to 50 thing I know I can go into settings att set the g54 offset manually to 192.65 from the g53 zero or something to...

I meant set it to 50, not move it to 50, if I would compare with Mach3 I could jog to a position then klick on the X coordinates and write 50 and the X would be in relative position 50.

Thanks for you answers :)
I read in the manual about pressing F8 and F7 but I dont have any on my controller, see picture.
But I found the Coord button under settings and pressing Coord one more...

Hello,
I´m trying to figure out the basic stuff for this controller and the manual is not helping.
I seem to be stuck in the machine coordinates and the absolute coordinates are the same, how do I...

I tried CAN+P at startup but it did not help, are you sure its can+p on this system? P is also L and Q on the same button.

Fixed Z with setting parameter 702 to 999999, I expect that x and y will work as well after the same procedure.
I guess the axis have moved after they shut the power down.

If the manual is to be trusted it should be 0M-Model B or 00M-Model B
It says series O-M om the front, se picture.
Is there a page where I can see the inputs and check the at least the signal gets...

Thanks for your answers, its most appreciated!

This seem to work somewhat differently, I press Home, then it does not matter which direction of the axis I press, both lit up and when I press Start...

Ops it was the door interlock :O

Another problem, when I home it it goes to over travel, I press Home mode, choose axis and the start home, is that the right sequence?
It just run the axis to the...

https://www.cnczone.com/forums/attachment.php?attachmentid=470288&stc=1

I rolled in this machine in my shop today, got it for a good price and I will change the control system later but for now I...

Is it easiest with brains or macropump or is there some other mapping feature?