https://stargb.com/cnc-sliding-head-lathes/sr-32j/ Fanuc 32iB
https://cmj.citizen.co.jp/english/product/miyano/bna-msy.html M70V Cincom/Mitsubishi
The Citizen is pretty easy to get my head...
Type: Posts; User: bspear
https://stargb.com/cnc-sliding-head-lathes/sr-32j/ Fanuc 32iB
https://cmj.citizen.co.jp/english/product/miyano/bna-msy.html M70V Cincom/Mitsubishi
The Citizen is pretty easy to get my head...
Either I've done this and forgotten or managed to miss it all these years:
https://www.cnczone.com/forums/attachment.php?attachmentid=448340&stc=1
Got a G2 with I and J for centre, blending to...
I can run a program from any point with the block search, but can't find how to simulate from a chosen point in the program rather than simulating the whole program when I've just edited a later...
New machine, I am using Shopturn with reasonable success but want to use Fanuc G Code 'cause:
- re use existing code (lots of jobs!) from previous lathe
- more finesse/customisation in fine...
On the Fanuc I would use G50 to limit the spindle revs and then G96 to activate CSS - can see G96 on the Sinumerik but can't see an equivalent for the G50
Any pointers?
Cheers.
Just taken delivery of:
XYZ TC 320 LTY Siemens 828D Lathe
Siemens 828D TE61
NCU Software V4.05 SP6 HF02
XZ+YC live head lathe
Had the training on Shopturn, impressed, very capable.
As with all...
Charmilles Form 2LC EDM PDF manual anyone?
Cheers,
Hwacheon Lathe Fanuc 0i-TD
Milling this profile on my C axis:
https://www.cnczone.com/forums/attachment.php?attachmentid=428074&stc=1
sorted the finished profile but can't take it in a...
Got this part:
https://www.cnczone.com/forums/attachment.php?attachmentid=412624&stc=1
Quantities - 10k per yr initially them increasing
Aluminium
Looking at the top 30mm thick section...
Fighting with my CAM output to drive live tooling.
Polar coordinates G12.1 on my Fanuc needs X as a diameter, the output from my CAM (Fusion 360) has X as a radius - ongoing to see if I can post...
Anyone use a DXF to Manual Guide i convertor?
Saw this:
https://www.scribd.com/document/341174434/Spec15-026-gfxe-15015-En-02-dxf2mgi-dxf-Converter-to-Manual-Guide-i-Arbitrary-Figures
but...
EN24 817M40 4340 ASTM A29 tough stock with a rough finish
What would you recommend, indexable tips or carbide? this is the part I need to machine, by the 100s:
...
Brother 2010 tc32 twin pallet
Been asked to sort out a job on this vmc which I've never programmed before and currently use a Fanuc 0iMD
On the fanuc I put subs embedded in the parent code...
I'm taking 3mm off all faces of some flame cut 304 stainless steel plate - tough, 300mm sq, 50mm thick - but am struggling to get above 80m/min (260 ft) on my cutting speed. I'm using these tips at...
Bridgeport Hardinge GX600 Fanuc 0iMD
I want to have a laptop directly connected to this machine for direct files transfers from pc to cnc, it has a ethernet and rs232 socket and and embedded card?...
Hi chaps,
Re: Bridgeport Hardinge GX600 Fanuc 0i MD *carousel tool changer*
When the tool change program O9020 (below) is called it responds to Single Block being turned on and will execute...
Sorted, enable the incremental after the initial G81 line, cheers again chaps
Fanuc 0i MD mill
OK, probably something obvious.....
Trying to drill 20 pcd holes using incremental polar movement so I can simply copy/paste the increment line, set G55 to the hole centre...
Had to put this on my mill 'cause too big for my lathe, I reckon took a good 4 times longer, the roughing wasn't too bad but the finishing takes for ever relative to a lathe, in detail, why?...
Fanuc 0i md
Can I output (to USB) 'all files' as individual files rather than a single file? Cheers
This isn't a code issue, it's about the position display - I've since found that when a run is complete - m30 -the control defaults back to g54 and cancels the tool offset. If I want to adjust any...
Fanuc 0i MD on Hardinge GX600 VMC - no manual
OK, still getting to know this controller.
Run a code using my G56 workshift and G43 H1, run finishes, go to handwheel to move the axis and make...
Fanuc 0i MD
Bridgeport/Hardinge GX600 VMC
Treat me gently, new to Fanuc mill.....
No conversational on this machine, machining a hex, tool heading off to unpredictable positions?
NB: 1st post, put it in the wrong category originally, apologies to those who have already read it
Fanuc 0i MD
My first time on a Fanuc mill after Heidenhain, spent a couple of hours trying to...
Can you get a fanuc post which outputs as canned cycles rather than g1/2/3s?
Sent from my SM-A300FU using Tapatalk
Cheers, I understand the offsets wouldn't stack but it was more about avoiding setting one whilst another is active particularly on the 43s - does g49 work OK on the 0i md?
Sent from my SM-A300FU...
Fanuc 0i MD
My first time on a Fanuc mill after Heidenhain, spent a couple of hours trying to get my head 'round the work shift and tool length setting and need to get a definitive on what...