584,837 active members*
5,516 visitors online*
Register for free
Login

Search:

Type: Posts; User: akihiko

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Re: High Precision Automatic Tool Sensor Cnc Z Axis, How to wire to UB1 Controller UC

    Hi

    Here is picture of UB1., Can you mark what you are talking about. "" just connected the override limit to the pins, and then i have connected that pin to reset in UCCNC ""


    UB1 doesn't...
  2. Re: High Precision Automatic Tool Sensor Cnc Z Axis, How to wire to UB1 Controller UC

    Ok. would share how did you wire it up... draw diagram.

    right now hive mines working, but only the yellow/green on X105 and 0V Pin/5 and I/O Port1, And work perfect. But that it can also be...
  3. High Precision Automatic Tool Sensor Cnc Z Axis, How to wire to UB1 Controller UCCNC

    hello,


    Looking for help to Setup 4 wire automatic tool sensor to UB1. I seen people on Youtube with it setup on UB1, UCCNC Software. Didn't show how it was setup/connected.

    The only wiring i...
  4. Replies
    20
    Views
    2,842

    Re: basic upgrade..!!! help

    No, its for 6040Z frame.
  5. Bulid or Upgrade Maximum weight/For Stepper Motor & Spindle Motor/Simple CNC Machine.

    Hello, CNC Nuts.

    This Thread is to help:. Newbies, CNC Hobbies.

    Feel free to post. Ideas, Suggestion. Recommendations, Possibilities. Creative.

    Stepper Motor's Nema 17, 23,24,34,42. &...
  6. Replies
    8
    Views
    3,126

    Re: Fusion 360 IN ACCURATE CUT. How to fix?

    (Spelling correction)

    """ First cut is accurate second cut is not.

    Have tried three different samples each of the samples first cut 30.50mm and after the final cut 34.29mm A perfect cut. On...
  7. Replies
    8
    Views
    3,126

    Re: Fusion 360 IN ACCURATE CUT. How to fix?

    ok, thanks

    upload now
  8. Replies
    8
    Views
    3,126

    Re: Fusion 360 IN ACCURATE CUT. How to fix?

    ok. i did .f3d under autodesk foolder.,

    which one, theres a list .f3d file about 30 file .
  9. Replies
    8
    Views
    3,126

    Re: Fusion 360 IN ACCURATE CUT. How to fix?

    Sorry, Don'r mean to sound stupid. how to locate f3d file. please explain with more detail.

    thanks
  10. Replies
    8
    Views
    3,126

    Re: Fusion 360 IN ACCURATE CUT. How to fix?

    ok,

    i upload it as rar file
  11. Replies
    8
    Views
    3,126

    Fusion 360 IN ACCURATE CUT. How to fix?

    hey,

    I seem to have some serious problem making some cuts with using 360.

    First cut is accurate second cut is not.
    I have tried three different samples each of the samples first cut 30.50mm...
  12. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    in side the VFD, jumper and posts

    Like this..
  13. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    like i said before, CNC software dosn't work right, all 4 jumpers are set to left side thats of VFD by default factory, Now move the jumpers to the right side if want to control it with the cnc...
  14. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    Hey,

    i hive rebuild my 6040Z from groud up. The JP-3163B controller board its not a good controller. it didn't work most of the time i used, one problem after other. and the VFD that came with it....
  15. Re: CNC 6040 connection FI MK100-2S1.5G-DK to mainboard JP-3163B cabling question

    hey

    Your reply from : Stepper motor forums (( Hi. did you start the frequency inverter with the PC? Did you do that with the wiring? I have opened a thread for this to help others as well.))
    ...
  16. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    Just fine out that (STEPPERONLINE 1 Axis Closed Loop Stepper Motor Kit 2.0Nm 1000CPR Nema 23 Closed Loop Stepper Motor+0-7A 24-50VDC Stepper Driver+2 Extension Cable)
    It only a 2.0 283.28...
  17. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    hey,

    I'm Thinking of Upgrading my Stepper Motor's to --> Closed Loop Stepper Motor.
    I'm looking at two differen Closed Loop Stepper Motor.

    1. STEPPERONLINE 1 Axis Closed Loop Stepper Motor...
  18. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    PS.

    i guess i can't use this tool, Unless i trim the shaft down to 12mm, to make fit ER20 collet #12.

    Any ideas
  19. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    hey,

    i finally finished my upgrade. Now i need to trim the surface. from 0.085 to 0.000 any tool recommented to this job.

    The material i used to do this project:

    1/2 steel plate 19x30
    18,...
  20. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    19" = X = 482.7mm

    29.5" = Y = 647.7mm

    5.5" = Z =139.7mm


    So just find out that my 6040Z it's lettle different from other 6040 them other 6040z. The X Axis it's wider. Where other it about...
  21. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    X axis 1605 ballscrew
    Y axis 1605 ballscrew
    Z axis 1605 ballscrew
  22. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    im sorry didn't understand -> (What is the pitch of the screws?) what screws?


    so her is the video: pay attention @ 1:10 first run, And second run @ 4:11

    Even though the cut came out clean....
  23. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    it set MM
    and YES backlash dis-enable

    Here is pics my setting in UCCNC AXIS SETUP.

    By way this is first time leaning CNC. Im leaning as go alone...
  24. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    You dont hear the stepper whining. Also just about around the third cut it start to hesitate. And them it correct it self.

    ill will upload another video so can hear and see closer.

    DIP SW on...
  25. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    check out what doing when its cutting,


    https://www.youtube.com/watch?v=KR5CnwVmLSU
  26. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    The reason I change to these motors, because the previous motors that came with the 6040 was Half the size of these guys, they had less torque power @ 24v supply. It was recommended if I’m going to...
  27. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    Sorry, i wasn't paying attention to the question at first. here's what i know so far about these motor's.

    NEMA 23 Stepper Motor
    Model: 23HS9430B
    Step angel:18°
    Motor Length:115mm
    Rate...
  28. Re: VFD HY 2.2kw 220v wiring to UB1 Controller Help

    So this my new Spindle 2.2k 220v 8A 24000 400Hz 80mm.

    i had change the support plate of spindle 1/4" to 1/2" so spindle can hive enough clearance, When it come up Stepper motor Z azis...
  29. Re: VFD HY 2.2kw 220v wiring to UB1 Controller Help

    After the adjustment and realignment to work area.
  30. Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z

    That's the way they came from LONGSMotor, they sold them with 36v power supply. when i email they support team.( they stated, that's configurtion for those stepper drive and Motor's each driver and...
Results 1 to 30 of 60
Page 1 of 2 1 2