502,814 active members
4,725 visitors online
Register for free
Login

Search:

Type: Posts; User: djr76

Page 1 of 19 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    2
    Views
    19

    Re: Coating Parallels

    You can room temp black oxide 65-85F. Your vendor should be able to confirm whether or not it will warp though.
  2. Replies
    2
    Views
    77

    Re: Need tapping advice

    Scientific Cutting tools, Inc, has a thread mill G code generator.
  3. Re: Haas DS30 Y BMT Turret Bearing Failure Due To Rust After 7 Months ???

    I would fight Haas and HFO tooth and nail over this, coolant shouldnt be mixing with grease.
  4. Replies
    8
    Views
    132

    Re: Why does my 303 part warp?

    I machine 303 all the time. Just straighten it in an arbor press.
  5. Replies
    2
    Views
    115

    Re: HAAS VF7 Program "Jumping"

    Does it only do it with the one program "B" and no others if "A' is running? If so, have you tried renaming the program(s)?
  6. Replies
    4
    Views
    194

    Re: Help with 17-4 PH

    Is your depth of cut greater than the radius of the insert tip? Did you try pushing your feed rate harder?
  7. Thread: HAAS MDI

    by djr76
    Replies
    3
    Views
    202

    Re: HAAS MDI

    in mdi, hit erase program to delete whats stored there.
  8. Replies
    7
    Views
    371

    Re: HAAS DS30-SSY with M97 Looping

    Set the Insert that is cutting the bore into another tool offset. Then call the tool with corresponding offset you set the tool to in the program.
  9. Replies
    6
    Views
    223

    Re: Trouble with spiral flute taps

    OSG Hypro NRT list 14001. I just did a job thread forming 10-24 X 1" deep in aluminum, did 3000 holes with 1 tap.
  10. Replies
    1
    Views
    129

    Re: Haas vf 2 chip chute wanted

    $495.00 in the Haas parts store.
  11. Replies
    1
    Views
    193

    Re: New Haas serial engraving macro location

    Macro #599 or I think #10599 NGC
  12. Replies
    3
    Views
    231

    Re: Chatter - I am lost for ideas please help

    Carbide or heavy metal bore bar? What kind of bushing, split, slotted? Does your machine have variable spindle speed? If you have facebook, the group called "Machinist" with 112K members have a...
  13. Replies
    4
    Views
    189

    Re: made an account just to ask some experts...

    Did you try browsing the denford website? Specialists in Technology for Education - Denford Ltd
  14. Thread: Rigid tapping

    by djr76
    Replies
    2
    Views
    177

    Re: Rigid tapping

    go to youtube, paste this in the search: Setting up a Right-Angle Head on Your Haas; G17, G18, G19 Explained – Haas Automation Tip of the Day
  15. Replies
    7
    Views
    341

    Re: Getting the 179 alarm on Haas VF2

    Not dripping with oil, to much oil is not a good thing either. It could be dry way up top where the ball nut never comes in contact.
  16. Replies
    14
    Views
    629

    Re: Haas 2010 TM2P suddenly wont boot up!

    Did you check incoming power? Mine did this last week, one of the legs was out on the power pole outside.
  17. Replies
    3
    Views
    319

    Re: pls, how to deburr this part ?

    vibratory finishing
  18. Replies
    3
    Views
    308

    Re: Help HAAS SMTC Doble Arm Motor Problem

    Is the brake resister still in one piece?
  19. Replies
    1
    Views
    322

    Re: HAAS HL SERIES LATHE

    Hit "A", then handle jog button, then use jog wheel.
  20. Replies
    6
    Views
    613

    Re: Wireless Probe for Haas TM

    Youre going to need a Maincon upgrade. Looking at around 12K alone for parts, then tack on labor for the tech to install. I had this done on a 98 vf2 and an 04 vf3 last year.
  21. Replies
    3
    Views
    234

    Re: chamfer and corner rounding issue

    Does this help?

    391408
  22. Replies
    3
    Views
    234

    Re: chamfer and corner rounding issue

    G02 or G03 uses an R command, G01 is linear.
  23. Re: Plunge End mill to make a Counter Bore in steel?

    If you can drill it with screw machine drill then interpolate the hole with the 3/16 end mill, it would only be 2 tools and probably the quickest. Cam software would be able to tell you the cycle...
  24. Replies
    4
    Views
    333

    Re: hass VF-0 controler

    I had a Maincon upgrade done on a 98 and 03 last year because we wanted to put a renishaw wips on them. Its a pricey job, think we paid like 12k each for the upgrade and probe package, then got...
  25. Replies
    2
    Views
    685

    Re: hass Macro Variables

    Do you have a manual? Usually there is a macro variables table in the manual. You can get them here as well. https://diy.haascnc.com/user-guide
Results 1 to 25 of 464
Page 1 of 19 1 2 3 4