sent you a PM
Type: Posts; User: BM3
sent you a PM
Turn the wireless off.
Only worry about the dlink switch for now
Take the switch and place it near the pc and connect it to power. Take the ethernet cable that was originally in the pc (that...
good
Dir Name needs to be the folder name on your c drive, in this case - cnc
once entered press F1 ok. turn the controller off and on again.
You have to be connected to the controller via a switch
Go to officeworks and get a 5 port switch and 2 or 3 meter cat5 cable (depending on how far the switch with be away from your pc.
This...
is the computer connected to the cnc via router or switch?
do that first as it will determine whether you have a correct connection.
after that networking will be easy.
Can you ping the CNC via the office PC?
You will be able to change the pc name
First you want to select static IP address on the controller (not via DHCP)
Then check what the IP address is on your office pc (for example 192.168.1.3)...
Hi Maki,
you should be able to access the ip address by going to f6 parameters, then it may show f2 or f3 network settings. If not you need to press F6 parameters, then f10 then it will show the...
Hi Cam,
How have you gone with networking the syntec controller? I should be able to help.
Hi Abid,
I work with HSD spindles all the time, dont worry about the green button the bulb inside has probably blown. I have had one or two before with the same issue, but the spindle has worked...
Hello,
Have you attempted to do a tool change?
Maybe check with the supplier first and see if the function was set from the factory. If yes, you could try a test.
Note that this may not be the...
Omar, Press the following keys
F6 - Parameters
F5 - Go to
a box will appear on the screen.
Type in Parameter number 3209
Hi, not sure if you are still having this problem?
If it is in the X Axis, have you tried changing parameter (141 X Axis Pitch amount)
Nash "So I question, whats the use of that USB drive?''
The usb slot can be used to import files or to add a second screen.
Nash "You cannot make a copy of the CF Card for your own safety"
...
For a ballscrew use either Kluber GL-261 or Mobil EP0.