Search:

Are these the actual readings from the supply or what the poles are labeled? I have a feeling that they are the labels...the data I need is actual readings from the output posts of the supply....this...

Once the power supply dies completely...you are correct that is it...you will be lucky if the machine even fires up...As the coils are breaking down you are experiencing it "dying". If you are only...

The thermally sensitive part you are searching for is the power supply...99% of all power sources (even the one in your garbage disposal) are thermally protected. Although cleaning fans and running...

It could definitely be the power supply or perhaps a nicked wire somewhere along the 24v line. The intermittance of your problem points to this. Throughout your workd day incoming power fluctuates as...

Call Gran Quartz stone tooling in GA. They have a CNC specialist there that actually taught me alot of what I know. He does nothing but develop router bits for the stone industry. Ask for a vacuum...

Making chips,
Agree with everything you said, however: rubbers require a 110% perfect setup all the time with almost no where on the tools to produce a perfect finish...if you can afford to purcahse...

Weird Finding today,
I am going to do the troubleshooting that you all have reccommended, however my boss will not justify the overtime to do it in until we have no communication at all...and as of...

brob...that is what I was worried about! I could not determine whether this was boosting the power of the serial communication in any way or merely would just aid as secondary power source for a...

the driver I am looking at still has a 5v source PCI however it has a built on transformer that will step the output up for devices that require 12v output.
I have posted a link below could you take...

there are no ISA slots in the computer,the cable is top quality, proffessionally made....we have tried purchasing boosters before but could not get them set up to work correctly....I found a PCI card...

I drove to work and connected the New computer to the NC with a short cross cable and success.....Program sent fine....the voltage readout from the cuurent card is 5v....from what I have learned...

try to find a belt driven spindle that holds at least 10000 RPM you will never use it over 8000 for stone but overgun it so you are not maxing out...you will need a sealed high speed bearing...sks...

Gentleman,
The stone equipment ( both machinery and tools) we use today was developed in the glass industry 20 years ago...it is in the last 15 years with the boom of the stone industry that we...

Looking inside my older machine,
The serial ports are not put into expansion slots at all...neither PCI or ISA.
They are connected to the motherboard via skizzy ribbon cables. Would a viable...

It Suxs...bad Spindles And Poor Loading Availability...get A Bav Or Northwood

NATURE OF THE BEAST...JUST AS OUR PRE-MOLDED BITS ARE OUT OF WACK WHEN INITIALLY PROGRAMMED AO TWO ARE SOME MOLDS DU TO HUMAN INVOLVEMENT AND VARIANCE....0.25 OVER HANG FIXES THE PROBLEM FOR A NICE...

Au Naturale ...no Chemicals Biodegradeable...horrible For Your Lungs

techniqiue and tooling....I promise it is possible some machinesa are made for it!

Finesse is all it takes....good success can be had in engraving side of the business and I take great pride in the pieces I have produced...pictures to come!

tension email me...I we can share info....check the name you know Im serious!!lol

Resin polish Bricks used in conjunction with dynamic compensation on natural stone processing machines prooduce a line free finish because of the abrasive nature of the poliishing positions...

I have worked extensively with bavellonis and Northwoods alike and hold very high stature with both companies...the Bavelloni possess a dry pump which has a water seperator and a dry pump no water...

gentlemen,
thank you for the as always prompt responses.
Would it be accurate to say that because i have a twin port card the voltages is being split between the two ports thus rendering rendering...

10 years stone experience and 4 years CNC...I have worked with large numbers of both Bavellonis and Northwoods and think that both have admirable qualities that when combined would produce the...

could you email to me as pdf...vry interested and would appreciate the knowledge!
Jimbo

[email protected]

hey man.... a trick I learned engraving fine marbles.....import any text you want from correll draw into autocadd...you may or may not have to trace the fonts but create a template and copy...

lol, it is all to the same these days.....I have bounced 3 times in the last two years....at 25 I must say that I am comfortable with my wage and my employer.....I think the problem with our industry...

display info is only text out put...if your machine is coded by macros check in the master subprogram there should be a spot to edit text output for various spots

Gar,
Thanks so much for the input...answer 1: short cable(50') gives serial line error. Long cable....I recieve no error but the program gets stuck and comes through in pieces...when i open the...

Gar,
Thank you for your attentive response!!!!
To answer your questions:
1. There is a difference in result between the long and short cables on the new computer. On the short cable I recieve an...