I've used it a little now, and I must say it working out pretty well... It is indeed a pull system. If I run the air fan at full speed, the cardboard does flex, but so my laser cutter cover, so I...
Type: Posts; User: mochouinard
I've used it a little now, and I must say it working out pretty well... It is indeed a pull system. If I run the air fan at full speed, the cardboard does flex, but so my laser cutter cover, so I...
Hi,
I ordered some 24x24 filter. 1 big particle filter, and a charcoal filter. I haven't used it yet. I need to buy more docking to connect to the exit air dock.
My goal is to only reduce...
Hi,
Is there a 'simple' process to lower the smell of laser engraving to make it less problematic for neighbor in a residential area ?
Marc
The problem is not under but on top... Also Engraving can cause this issue, though it more related to the cutting process... I'll give it a try anyway and see if it help when cutting
Using 40 watt laser with air assist, speed 100% and power at 1%.
When I engrave or cut, I get this residue that stick to the non engrave section of the acrylic making it lose it shiny surface.
What would be the easiest way to wipe those off ?
I've used water...
I personally used Retinaengrave and it does have lot of issues, and really wish it were open source so I could help making it better... But it does the basic job.
I do lose setting all the time,...
A quick reply would say to NOT TO DO IT... You can't laser cut copper as far as I know, but also that the PCB material is toxic to burn (most of them are), and if contain PVC can kill you and your...
My total UPS cost was 450$ for next day shipping to canada (UPS Worldwide Saver), duty and taxes of the FSLaser 5th Gen laser. Would cost probably around 350$ or a bit less with standard ground...
I really think for 1000$ you could do it...
Here what I would do if I were you on the cheap :
I would look at making home made mirror from Hard Drive platter and set it up and test with a normal...
Weird, mine was ok... It pretty evident that something not ok... Wonder why they didn't catch this at the factory..
I haven't look at how the floor remove yet... But it doesn't seem to be a quick...
The air compressor where to the one who emailed them about it following them saying in the comment about a special offer for KS user.
Note that the air compressor is A MUST for Safety ! I cut...
Here a quick rundown for the cost of the stuff I bought based on US price I saw.
Normal FS 5th Gen 20x12 laser : 3500$+125$ shipping (ground) (3000$ for ultra early bird kickstarter campaign)
Air...
Some of you ask me for the review but I didn't had the time to finish it... But here my document I'm working on so far...
...
Hi Group !
I finally received my first laser cutter ! And it working mostly out of the box.
I got my first print out of it, you can see it here. It 1 side of a Star Trek Isolinear chip on...
Using a smaller focal will make smaller spot size but only in a thin focus range. This is why using a longer focal length is needed for depth cutting in addition to speed and power. Longer focal...
In the video, showing to use tap water might not be really good idea.
I don't think you have to worries either... I am also waiting for my laser cutter from the kickstarter. I'm disappointed they hold off on the delivery but there not much we can do than wait...
I...
FSL have done several thing to other member here that are not good business practice (Offering bribe for good review, censoring post on their forum...).
I myself went to get one and stop after...
Even the FSL kickstarter, I found it border edge limit, as it a finish product and is basically just selling a product, but it was a recent development made product...
However this one really...
I've read that when you do raster laser engraving, you need ~1 inch of free space on both side for slow down / acceleration operation of the head. Maybe the error is relate to that.
I've started a wiki to try to keep as much information in 1 place that I can find. I never played with a laser cutter yet... It should arrive in 3 week.
You can contribute / check the info I put...
I'll say that 18x24" is a MUCH better size ! Lot of project I find are all based on 23", so 24" is perfect for most job.
I'll get an fslaser one in about 2 week. A lot less expensive (3500$) for...
Thanks for the info.
I already plan to do some modification to my dust exhaust system I received since I found leak in it :( Might go get some aluminum tape to seal it.
Moc
There is different laser wavelength that will mark thing differently on metal.
Take iphone engraving, that show up black, they used an fiber laser. They cost +20k$ in general. But they are only...
This : 1 HP Mini Dust Collector
OR this : Portable Dust Collector - 13 Gallon (Better / less noisy)
That what your looking for.
Note the bag is useless. You need to vent it to the outside.
...
Hi,
Is the smell only emanating from the machine, or the smell will imprint into environment, so even when the machine is removed from site, the smell remain ?
I want to set it up at the...
A generator plus a UPS that work off battery all the time(Not the low cost one) should be fine in term of stable sine wave.
Apparently your not alone sadly. The fact that they don't accommodate much prove that it a regular occurring.
I replace my client phone without cost even after the 1 year warranty because I get 1...
I've started maintaining an Google Docs document with some of the info I found interesting... I tried to get FSL to start a wiki about Laser Cutting / Engraving instead of relying on a censored...