It seems that you have a short circuit in the machine or your power supply is bad.
Type: Posts; User: berthagua
It seems that you have a short circuit in the machine or your power supply is bad.
From the Fanuc manual the A06B-6079-H208 is specified 80/80 and the equivalent for one axis is A06B-6079-H105.
So, inside the amplifier the firing board is diferent in electronic components that has...
also, check in the screen the actual rpm. if you dont have rpm the spindle encoder may be bad.
HI. DO YOU SOLVE THIS . I HAVE THE SAME.
THANKES IN ADVANCE FOR YOUR HELP.
WE HAVE IN FANUC OT ALARM 520 OVERTRAVEL +Z WHEN TURN ON . IT REALISES THE USUAL PROCEDURE FOR THIS ALARM BUT I COULD NOT CLEAR IT. LATER IT MODIFIES THE PARAMETER OF SOBRELIMITS BUT CONTINUOUS THE...
DONNELSON THANK YOU I WAIT FOR YOUR ANSWER
THE FR-SE HAS SE-TC BOARD. WE LOST THE NUMBERS OF IDENTIFICATION IN THE CABLES. WE DON`T KNOW WICH CABLE IS IN CONECTOR 21 AND 51.
DOES ANYBODY KNOW THE SIGNALS FOR THESE CONNECTORS OR IN A NORMAL...