Thanks, i will have to study that a while.
Type: Posts; User: dlaery
Thanks, i will have to study that a while.
It's a test to see if anyone is paying attention. You are the first one that has commented. :cheers:
thank you! i will keep climbing.
what is "Fz"?
I am cutting a 3d cavity in a 2 part mold, aluminum. it is 12 inches long by 1 inch wide, rounded, tapering long ways down to 1/8 inch
I use a 1/4BM, then a 1/8BN to finish, my mill has lead...
I have used my taig for 10 years using these clamps , i don't remember what they are called,it is by a popular work holding company, several online stores sell them, i am sure someone here will...
i sent you a private message
sounds like you need to use the USC or if I was doing this I would use Translate or rotate to get the view i want in the top view of the workspace., then I think you extract would work.
when you do the hide are you point and click to select to hide or drawing a window around what you are hiding?. if you are using the window, then that will hide the extracted lines also.
go to Utilities, to Extract Edges, to single, then select your surface, click ok. now you need to hide your stp file and then your lines will show up. and then save as dxf, hope that works.
what ver BC?
you have tried extract edges?
Thanks!
I missed the dotted line thing, changed the drawing and now that part looks right.
Finally got it. The video was very helpful.
This also showed, (which I already knew,) that this tool...
I know I posted in here about a custom endmill, one with a 1/8" shaft and 1/16" cutter ball end, but can't find it.
I have created one and i get an error message.
i wanted to find the post that I...
thanks, the problem has just started in the past 3 weeks. the only thing I have done different is have been adding a couple of new tools.that may be when it started.
ok different day no changes and the problem come back.
anyone have any suggestions?
Ok, here is what happens. I have made a small change to the geometry, not where the collision takes place and now it works fine. the change I made was not to fix this problem and don't see why this...
I have this exact same problem everytime.
I make small molds for fishing lures and the collision happens at the end of the hook. everymold has a different hook, not the same file, but drawn the same...
thanks! that did the trick. my pulley was too low.
I found some useful info on Google.
I have used this CNC Taig mill for 10 years. I would start having belt problems and realign and it would work.
Now I am having problems and it looks lined up to me, but the first thing happens is...
wow, that was fast. Thanks!
can this be bought somewhere?
I have ver 29
my "add" tool looks like yours in the above post, not sure what you mean by "Form tool"
I openned a new file and drew my tool and added to the tools but when I would open my machining...
I have Version 29
I found it,
I have a progress button in the top menu of the simulation, but when I would click nothing would happen. then i noticed at the bottom I had to click and drag to...
Not seeing how to turn on Simulation Progress In the Simulation Mode
whenever run a simulation I get an error
I chekced my geometry and did have a line not connecting now I think it is working.
Thanks!
thanks, that helps a lot.
but my tool doesn't show a ball nose and yours does. it also does not simulate the ball nose. what am I doing wrong?
where is the setting for this?
How can I enter this in my Tool Library?
I have tried to modify holders and arbors to accomplish this with no luck.
my problem is I have a small deep cavity that has detail in the bottom of the...
Thanks, I am cutting aluminum. I'll try the HSS