I'm having problems using soft limits for the lathe on my Mill Turn. It always says 'machine out of limits for softlimit activation'. I've tried moving the table on all 4 corners, of home, and...
Type: Posts; User: walters474
I'm having problems using soft limits for the lathe on my Mill Turn. It always says 'machine out of limits for softlimit activation'. I've tried moving the table on all 4 corners, of home, and...
As my El Dorado came, it saged by the fifth column. I've always only trammed the mill bridge when changing the height of the mill bridge by stacking parallels on the 4 column base plate and...
Making sure that the pulley allen set screws, on the stepper motor shaft, are tight might help. I had a intermitant crashing sound on the Z axis (mill) in the middle of travel (cutting air so far). ...
I've never had a good look at a Patriot, but for stiffening my Eldorado's mill bridge, I sandwitched a stack (as needed) of parallels between the 4 column mounting plate and tightened the mill bridge...
I purchased a demo/tester Mill Turn. As I received it, the caster wheel tires were falling apart. I replace the tires from WWW,sescasters,com. I believe the part number is WPHXKK3.112XXXR8S (A...
As I already mentioned, I did receive instructions for tramming by shimming the mill head spindle housing. I thought it more solid to shim the bottom 3 corresponding columns and noticed that shims...
I have been able to correspond with Shopmaster regarding this. My memory's vague, but I think correspondences did not work through the Shopmaster website but did through direct Email so they were...
Hi JT
S# MS0150015
Thank you.
Walt
With my Mill Turn, moving the Z axis manually seems to have about the same drag going up and down (to my surprise (compared to my Eldorado anyway ))
Any suggestions for tramming the mill? I emailed Shopmaster and I have not receive a reply. It would be nice if a parts breakdown was available, which might help.
I received their demo/tester. ...
I'd like to know as well, for my Mill Turn. I emailed Shopmaster and I got no reply.