Search:

i've tried all the reset codes that i can find, nothing resets the memory to use the correct current G54 settings.
The only way i can get it to re-read and obey the G54 in to do a manual zero return...

I noticed something odd on the 3 axis mill with fanuc 15M controller.
I generated a program to cut a chamfer round a 100x50 block, using a dia 10 reference dia for my chamfer cutter.
I normally...

oh, my program also has this in the start sequence, i took it out by mistake ( with company info)
G40 G94 G17 G80 G21 G49

I noticed something odd on the 3 axis mill with fanuc 15M controller.
I generated a program to cut a chamfer round a 100x50 block, using a dia 10 reference dia for my chamfer cutter.
I normally...

Superman,
I tried what you said, and lo & behold ...... It worked.....you were dead right, it looks like I've got some work to do on my post processor.
Thanks for your help.

I don't think that is the problem tho, thats the same as all my other program start ups, I've even copied the whole start from another program that worked perfectly, and it still won't move in Y...

I had an idea to hold a nozzle off a molding m/c , in a collet , and a turning tool in the vice, to re skim the domed end.
I generated the code, but when I ran it, the m/c totally ignores the Y axis...

thanks for your help, that's a worry that the software output dodgy code, I'll look at the post processor maybe run the program through another generic one, and see if the same error occurs

I ran a program on the 3 axis mill and the Fanuc 15-m is ignoring the G03 line in some instances but not others.
About 40 holes were cut and with 4 holes the m/c ignored the circular move all...

Does the 15-M controller have the capability to accept helical moves for 3 axis milling?
I've sent it code that i had used on a 6M before without issues, but this won't play ball.
Do I need to...

We're having problems drip feeding G code to the 3 axis milling m/c via easy DNC, getting buffer overflow all the time.
We've now tried to send a program back to the PC but it didn't get there, so...