Search:

***UPDATE - SOLVED***

It turned out to be the main board which is located inside the main cabinet on the side of the machine. When the video memory on that main board goes bad, the board needs...

Here are a couple pictures. I looked over the entire board very carefully, all of the soldered pins looked clean, nothing out of the ordinary. No burned spots, no caps bulging or leaking, etc....

Control was turned on yesterday and the screen is full of the most random characters. I suspect it's a CRT control board problem, but would like to know if anyone else has had this happen??

9.2, I did get it to install on another PC, finally. I purchased a used vintage computer, exactly the same as the one currently running it and it installed no problem. I tried multiple other...

We are trying to upgrade our failing PC. When I try to install Fabriwin 9.2, it installs the Sentinel drivers, but before the software installs Fabriwin, it says that it cannot find the...

Our old Dell which is feeding our Amada Vela 2 is needing replaced. I've tried two different computers, and for the life of me cannot get Fabriwin to see the keylock dongle. The software first...

We are using Barton 80, and yes, correct orifice and tubes. We have a 2nd machine as well, same setup, so there is a good side by side comparison, the other machine has no issues. We've partially...

Yeah, I thought about fabricating a screen for the end of their hose, that would take care of one problem. I think they didn't like getting in the tank and breaking up the compacted garnet with a...

As the title said, is there a magical periodic process or constant removal system that really works, and may work with our machines? I don't mean just work, but work really, really well with little...

Hey guys, We've tried everything to try to resolve a poor cut quality issue. Out of nowhere it started cutting like crap. It's consistently crappy.
Things that have been tested.

1) all of the...