Hi, im very interested in what your doing i need some upgrades on my 850sx its on a horizontal mill how can i get ahold of you or you can email me at:
[email protected]
Type: Posts; User: miran70
Hi, im very interested in what your doing i need some upgrades on my 850sx its on a horizontal mill how can i get ahold of you or you can email me at:
[email protected]
I'm sorry those files i posted are all Gibbscam .PST files except i think one so you guys need to download them and see if any will help you i cant say for sure but they could possibly help.
mike
LOL nm camsoft wont work with 64 bit software.
Hi everyone i sure could use some help. We had camsoft on a computer with windows xp 32 bit we upgraded the computer when we purchased version 17.4 of camsoft because of the speed of the computer....
i have abunch for dostek we use it with gibbscam here they are if you need dostek to just try i can help you pm me if you need that i love it
yes im messing around at home today still have a few things to do but overall just relaxing.
wow it took me 16 hours to copy all that information hope i dont ever have to do that again.
here is the link for the allen bradley 8400mp manual on ebay right now.
ALLEN BRADLEY 8400 MP MANUAL ON CD-ROM | eBay
Hi has anyone tried boring a half bore with a boron tipped insert the bore is 6.000 and it has stoody in it i interpolated most the weld out of it i need a solution to bore it its only half of a bore...
Hi i was wondering if anyone would happen to have a list of servo motors that will work with an SD1525-10 servo drive my encoder went out on my motor and i was wondering how many other servo motors...
ill try to get the manual completed this weekend i dont know if if i suppose to say this here but im going to charge 30 dollars for a pdf file on a cd and no shipping charge i wouldnt charge anything...
roger i think i have the pages you want im waiting right now for my wife to get done with the copier then ill copy them would you send me an email address to send the pdf file to. where is the uart...
i also would like to have the schematics on the clam shell i cant get my rs232 to work i shorted the chip and burnt it some how it was working before that i have replaced the chip and the receiver...
you must type in G45O01 then you must go to the fixture offset page and enable the fixture offsets as many as you want when the control is powered down with no batteries in it it disables all fixture...
Mmmm it does that for one hole but what if you have 20 holes will it go back to 5 inches away then do it again? mine isn't im wondering if someone didn't finish the logic or something
yes i know the G00 Z5.00 goes in the line before the G81 cycle it is what sets the P plane Ive tried putting the P in the same line as the r plane and depth and such it doesn't seem to read it i...
ya but if you put in say R5.0 it will start feeding from that point im talking about whats called a P plane as in any other controllers it will be listed as say
G00 Z5.000 G81 Z-.300 R.1 F1.5 P1...
OK i was wondering how can i program a jump height into the drilling cycles i need a p plane programmed into the cycles because of clamps and different sized parts i cant seem to get this to work for...
crap Scott i just tried to call i forgot you guys are an hour ahead of me its running great im happy as hell with it like i posted only problem is when you first start it up it gives you a little...
well mine does the same thing until it warms up. if i wiggle the relay the little red light comes back on like its suppose to and it works fine then seems like when its warmed up it stops that and...
im doing fine scott i hope your busy and doing well im busy as heck and still cant seem to get anything done haha ill give you a call in the next few days to see what your up to.
mike
im looking for firmware upgrade files for an allen bradley 8400mp control i believe its revision H i know i can buy the chips i was just wondering if anyone had the files so i could burn my own...
Hi everyone i hope this isnt off topic but i would love to learn and understand the logic files in camsoft we have a hbm with camsoft on it and i would like to be able to write some new logic and...
all are right except the computer save and send settings ill check the ones at work i have a picture of them there
Hi i run an 8400 mp everyday and i turn it off every night and it dont lose its parameters even with the batteries out it does however lose any programs you have stored you might have another issue...
HI im looking for a couple sd1525-10 15 amp boards myself if anyone has acouple for a decent price.
i have a ab8400 manual im in the process of creating a pdf file if i get it done ill see what i can do i might just post it for free btw i love my g&l boring mill with the ab 8400 on it
HI im looking for a programming manual drop me a line if you can my boss would even pay if needed.
thx mike
Hi my boss is looking for parts for our 8400 he would be interested please drop me a line. thx, mike