Sorry for not updating the post.
The problem was in the pendant, sent this out for repair and the machine is working perfect now (except from other Acramatic problems that pop in once and awhile!)...
Type: Posts; User: PeeBee
Sorry for not updating the post.
The problem was in the pendant, sent this out for repair and the machine is working perfect now (except from other Acramatic problems that pop in once and awhile!)...
No, I haven't checked the batteries, actually I haven't found them... Do you know the minimum voltage?
New HDD, still alarm...
Yes, I have unplugged the cards and all the contacts I can see, cleaned them and replugged. Have done it 2 times now cause this alarm is causing so much problems! restarted the machine just now, and...
Thanks for the info Bigmoe, just cleaned all the connectors, but the alarm is still there... Have you had the same alarm on one of your machines?
Thank you for letting me know Mike. I have tried maver1ck, and will PM Mag service aswell.
Thanks!
Hi guys,
I have a Cincinnatri Arrow 750 with 2100 control, on startup all the lights on the pendant lights up, and the screen works, however further down the boot I get alarm 17-28:
"Cause: A...
Have been looking at different solutions, and I think I'll go for the Dynomotion KFlop and Kanalog. http://dynomotion.com/Kanalog.html
Seemes like a very well built controller with lots of...
Here's my motors:
http://www.sem.co.uk/files/brochure/MT30R4.pdf
Can't I use this with no problems:
http://www.rutex.com/us/index.php?productID=124
Or am I better off with my excisting drives...
Here's the motor specs:
SEM
Cont stall torque 3.2NM
Max RPM 2500
Volts 145
Pulse amps 32
Tacho 9.5 volts/1000rpm
This may be to heavy for those small servo controllers?
I'm missing the keybord, and at least one card, but getting that old control running is really not an option for me. would like to upgrade it so it's more user friendly. The machine will be for...
I have a Bridgeport Series 2 CNC with Heidenhain Heidenhain TNC151 Control.
I'm missing some parts to compete the control on it, so I figured It would be better to change the whole thing to Mach 3,...
Anyone?
I have a old Mazak 3l CNC lathe, I bought the lathe in USA and shipped it to Norway, when I got it all the bords here hanging outside the lathe, due to a truck crash and it's also been outside in the...
I have a set of magnesium wheels for my racecar, but the locking holes on the back of them have a different bolt pattern than what I'm using.
Can anyone tell me how I can fill these holes with...
I haven't worked with g-code before, but I have downloaded a few programs lately and been trying to figure it out.
What I want is to get my autodesk inventor drawings into g-code.
Is there any...