Hi all
I am trying to machine a spur gear, 20 deg, module 2...
Gear 1 with 35 teeth
Gear 2 with 85 teeth.
The sales person for the inserts says that the gears will have different tooth...
Type: Posts; User: mrclauds
Hi all
I am trying to machine a spur gear, 20 deg, module 2...
Gear 1 with 35 teeth
Gear 2 with 85 teeth.
The sales person for the inserts says that the gears will have different tooth...
Hi all
Just want to know if its possible to change a Fanuc OM or Oi control to the following RS232 settings?
Baud 9600
Data bits 8
Stop bits 1
Parity None
Flow control none
Thanks in...
Thank you for the info... So basically I will have to do some PLC modification?
Hi Guys
I recently got some machines with a GE Fanuc 21i-M control...
I am familiar with macros and have no problems on any of the other machines I have...
However this machine, I cannot do...
Hey guys
I have a machine shop with CNC turning lathes and CNC milling machines...
I'm looking into making a custom application machine for our needs but need some knowledge.
I would like to...
Hey Guys,
Sorry it's taken so long for me to get back, didn't have access to internet since we last spoke.
I just wanted to say thank you so much for all the guidance, real golden nuggets of...
Thanks for all the info guys...
Seems another steep learning curve is on the horizon for me...
Let me give you guys an idea of where I am and what I plan to do so maybe I can get some answers to...
Hi guys
I understand rc servo motors, but see that on my CNC's, there are alot more than 3 wires coming from the servo...
Can anyone offer me links where I can go learn more about these servos?...
Hi guys
What an informative site... so much information...
I've been searching and have not been able to find the relevant information so was hoping someone could help me with some questions:
...
Hi Everyone
Im looking for some cnc file transfer software...
I have tried quite a few, but none have met the requirements I need
I used to use NC Edittor but it is still running on DOS...