Search:

Assembly of the harmonic drive
435878

435880

Assembly of the brake assembly and face plate
435882

435884

Winding the brake coil
435862

Brake coil and steel bearing housing
435864

435866

Layout of parts (with an earlier version of the brake disk)
435868

The 3D CAD model
435846

The harmonic drive
435848

Machining the steel bearing housing
435850

435852

Hello,

I would like to present the latest addition to my workshop. It’s a 150mm DIY 4th axis (based on a harmonic drive reduction) with an electromagnetic disk brake.

The basis of the project...

Hi,

Not unless you want to feed the actual position back to the controller. My install was done without feedback and relies only on the servos for getting to the commanded position. You can setup...

Hi,

Yes, indeed I also have a SZGH-CNC1500Mdb controller on a mill. I reference all my tools off the mill table. If I'm touching off on a 1-2-3 block or something else I input it's height by...

Neat installation! It looks like OEM.

Thanks for the tip on the toshiba drive!!! I will definitely give it a try. Going back and forward with the USB stick to the PC gets old very quickly :)
...

Hi,

Sorry for the late reply...

The controller comes preset from the factory with a generic set of parameters that you can edit to suit your machine. They supply you with a manual that goes...

Need a prototype or a small production run of your parts? We provide fast turnaround precision CNC machined parts in Europe. No minimum quantity required.

We specialize in machining non-ferrous...