Now here's a question, I'm running the machine on a rotary phase converter and haven't found any documentation if it matters which leg is the manufactured leg. The output from each leg of the...
Type: Posts; User: ejrego
Now here's a question, I'm running the machine on a rotary phase converter and haven't found any documentation if it matters which leg is the manufactured leg. The output from each leg of the...
Today when I started the machine, it did it's thing and gave me faults on all three axis. I tried the reset button as suggested and the machine would reset, but would still give fault 18 when trying...
I have a 2004 Fadal 3016 (AC drives) that will periodically give amp fault 18 on all 3 axis during start up. It's a sporadic issue and once it finally clears, the machine will run fine. If the...
I know this is a long shot, but I smoked the amp for the servo turret on my 3016 and am wondering if anyone has one they would be willing to sell? If you don't have a complete amp, there are two...
My machine currently has a 1040-3A mill interface board installed in it (2004 model year). I'm under the assumption that basically any revision of mill interface board can be installed successfully...
Got a 2004 3016 which is having tool changer problems. When I first start the machine, and enter CS, the tool changer will rotate slightly stop with a thud and then error out. If I try to manually...
A couple quick questions on the tailstock for a Mori SL1....
How much travel should I expect to see from what we'll call the quill? I'm only seeing about 2.5-3". If it's supposed to be more, how...
Hurco Hawk 30 Tool Room Mill
Perfect CNC for a farm or garage shop. Big travels, small foot print, and easy to load bulky parts. I bought this machine from Brigham Young University about 5 years...
I recently purchased a 2004 3016 with a 32MP control. What is the best way of adding a USB port? I've read it's "easy" but haven't stumbled upon any instructions. Do I need to purchase something...