Hello,
Anybody know how we can mirror a Xilog toolpath in the NC code?
I find a Mirror X and Mirror Y in the manual but I can't to use it. Any body can show a simple example?
Best Regards,
...
Type: Posts; User: Tribor
Hello,
Anybody know how we can mirror a Xilog toolpath in the NC code?
I find a Mirror X and Mirror Y in the manual but I can't to use it. Any body can show a simple example?
Best Regards,
...
Hi,
IT's not full clear for me how to work this import exe.
I copy it to the cnc90 folder. After I run i with a G-code file name? eg.: import.exe test
I have a Customer who have CNC90 and I...
Hi,
Anybody has the import.exe for the CNC90 V3.1?
Or anybody can tell the trick how to upload iso code to the controller?
Best Regards,
Tibi
Hello,
I have on old Biesse Rover 13S with CN 400 plus controller.
I programmed it with on old Biesse editor with a PC with windows 95.
I need to change a PC, but I have no the Editor's install...
Hello,
Anybody has a manual (*.doc, *.pdf) for Trumpf Sheetmaster 1600 programing?
It's in a TC500 punching machine, and I need to know what the U parameters means in the Sheetmaster setup when...
Hello,
Anybody has a example program or a programing manual to Finn Power A5 with Sinumerik 840D controller?
Reagrds,
Tibi
Hi,
What is the different between the TOPS 100 and the TOPS 300?
Regards,
Tibi
Hello,
We find the problem. :cheers: The machine don't use the G00. ( I think G00 parameter is empty or 0.)
I edit the Radan post, and change the G00 to G01 and the machine is work fine.
I think...
Hi,
It's a Laser cutter. :)
The machine is in auto mode.
Regards,
Tibi
Hello.
We try to use a Trumpf TL4030 (2400) machine with Radan.
When we try the NC code, the controller say the program is runing, but the machine don't move. No error message, and nothing. The...
Hi,
Yes there are some spec G-code. I have a five 5axis Hurco manual for CAM post's. I upload it today.
We try these g-codes but not work fine. I think we made some thing wrong.
Has anybody a 5...
Hi,
I am testing the EC 2011 R1. There are some new thing:
- Path smoothing in the Finishing (Turning)
- Contex Error checking Instructions
- Fastest calculate the Roughing toolpath (40-50%)...
THX!
Regards,
Tibi
Hello,
Is there a G-code or any command which send the tool a reference point in the Hurco Ultimax 4?
Similar to the Fanuc's G28. I want to use it before the 5axis table indexing.
Regards,
...
Hello Jon,
In the Edgecam very easy to make engraving toolpath, only you can know some step.
1. Open the dwg or dxf file
2. Setup the zero point
3. Go to Machining, and select a...
Hi!
Anybody has a MAZATROL user guide?
I need, how to upload to the controller a manual write program?
(for example I write in the notepad, or any other texteditor)
Thanx!
Regards:
...