Search:

Yes, I uploaded the backup that I had initially made when the machine arrived.
All except the issue that I mentioned works fine.

Hi @Zavateandu!

thanks for reaching out!
Youtube link of the issue:

https://youtu.be/EBXIQpgkK6Q

Link for all my parameters and the info I have been able to find on these machines
...

Daewoo Puma 8s Fanuc OTC Absolute compensated tool geometry not working
Hi! I'm having an issue with a Fanuc Otc Daewoo puma 8s lathe 96' Bought it 2-3 years ago and had it in my workshop, first...

Hi! I'm having an issue with a Fanuc Otc Daewoo puma 8s lathe 96' Bought it 2-3 years ago and had it in my workshop, first thing I did is made a parameter/diagnostics backup, never tested the...

Hi Wojtekthx,

Could you help me with your Puma 6s parameters?
I am needing to double check against my parameters, thank you!
Having some issues measuring tools and displaying the measured...

I'm having the same issue, were you able to solve this problem? Thanks in advance!

Hi!,

Its me here again with the Victor Tns-1 Machine!
Hope you are all doing fine. Given the fact that this post has something to do with lubritcation, does someone have an Idea which parameter...

Ok, thanks, and please let us know when you are able to solve the problem, Good Luck! :wave:

regards,
Alberto

Hi,
I´m not too sure about this alarm, but I am sure about one thing.
I have had problems in the past with some machines, That if the underlying issue is not solved, then other errors alarms can...

Hi Richard,

Im currently living in South America, no longer in Austria.
I´ve worked several times with Pat from Hytech Automation Repair, you can look him up in google.
He repaired a Spindle...

Hi Richard,

Try checking the top pcb Board of the Vac Spindle drive, and see if any capacitor is either Blown on the top, or has loose legs. With a bright light maybe you can check if there is...

Hi @Geserteg, were you able to solve your Issue? I have an Okuma LB15-IIM,
Two days ago had an X-Axis Diff Alarm, some weird sound was coming out as if something was stuck? or broken..anyway its...

Well, problem solved. Bought an Svp board directy from Okuma, they are pretty expensive.
they couldnt tell me yet what has caused this. I´ve had some power outages lately, maybe this caused this??, ...

Dpuch,I appreciate your help.. thanks..but These were not the parameters for my machine.
Changed DAC chips/NVRAM chip with originals
Got the original parameters from a Friend F1-53 and the Spindle...

Hi,

Well, I bought a new Spindle Drive Unit. Placed the old parameters in the spindle drive. And it didnt react.

Changed parameter in PLC #2 to 0 to override Machine ready signal for spindle,...

@okumawiz I just got a new Servo axis board, changed it..and Still have the same problems, same alarm, 903 Alarm-p svp error. Im wondering what the 3888400 Alarm might mean.


Update:
** Uploaded...

Hi @zavanteandu,

I made a list with the Parameters according to, I attached it as PDF file here..
Confirmed the parameters that I could change with DATA SET,
powered machine of and off.
Sent...

Hi Zavanteandu,

Oh man, Yesterday morning I turned on the machine and had Alarm 17 again. I dismounted the Spindle Drive and cleaned it, and I had a bad Contactor inside the unit.
I cleaned it,...

@mkd I hope its not the SVP board, i guess it would be a big coincidence that the servo axis board has two or more visually damaged components and that the Svp Board also got damaged[emoji22] I will...

@Okumawiz here are the pics of the damaged 7915/ and Leaked cap.Cleaned board,Tried changing the components, but didnt work. Instead of loosing more time decided Getting an exchange servo axis top...

Thank you M.Rishikesh, your post also Helped me a lot. AL-17 gone..By the way, is there any way on how to backup Spindle drive Parameters?

Sent from my SM-G903F using Tapatalk

http://www.cnczone.com/forums/fanuc/267446-fanuc-spindle-drivea06b-6055-h122.html

Initializing Procedure in this Post did the trick :) no more Al-17 displayed. Machine is running now. Now to I...

Zavateandu, Thank you, you seem always ready to help. Seems as in this rainy season that just started I have been having problems with machines that have worked all year. Do you think humidity have...

Hi!,

I have Alarm 17 on the main spindle drive on my Excel 810 with a Fanuc 0-M control. Im missing the spindle Driver parameters. Spindle Drive is marked with a20b-1003-0010/05a
Does anybody...

@Okumawiz I think I found the culprit??

Servo axis drive /SVCII Board Type A (E4809-770-065-A) A cap (270uf 25v) has leaked and shortened a 7915 voltage regulator,the leak..on its way seems as...

Hello Everybody..

This week I scheduled a repair on my machine OKUMA lb15IIM, Took off the machine enclosure,
took of the chuck, Hydraulic actuator off it was vibrating... etc.. I also sent the...

Hi!,

Thanks! Now all is clear, solved the problem one of those lubrication lines was clogged. Cleaned the filters and the lube is working again :) seems I missed the first time where the...

Zavateandu,thats exactly how my machine looks [emoji1] only that mine has a brand new paint job. Now that you say that you are a service man on the victor machines..today I decided to take of the...

Correct Zavateandu!, But the procedure is that
1.) X axis must be Homed
2.)Turret must be in front of the Tailstock (There is an arrow)
3.)Mode must be in RAPID 50% or less
-then TAILSTOCK...

Hi!,

Just to let you know I was able to resolve the Issue, the Procedure is in the attached picture..Found it somewhere online, it was for a model TNS3 slightly newer version of the Lathe.
Im...