We have a Hyundai Kia lathe with a Fanuc 32i control. Our tool life function is not showing up. Any ideas?
Type: Posts; User: mt92
We have a Hyundai Kia lathe with a Fanuc 32i control. Our tool life function is not showing up. Any ideas?
I will try it next time I am at the machine.
I used the same endmill and left the same finish amount (.02" per side) and it cut right on 1.0" measuring with a micrometer. Maybe my max speed is throwing thing off. If I change the step wont the...
Why would it be right on at 1.0"?
I got my used cnc router running and changed the steps in the config to get it to cut a 1.0 square. This ended up a 2030 steps. I have no idea what the pitch on the lead screw are but when I tried to...
Are the UC100 reliable? What is required to go with the smooth stepper control? Are they reliable?
I bought a used cnc router and would like to be able to use a newer computer with Mach3. What are my best options?
Thanks
If I am going to be in the 3k range I would rather have a machine like the Jcut 6090 in your link. I could not find a price for that machine. Does it have true linear guides like the X6-2200? I also...
Any opinions on the machine in the link below, they are within driving distance for me??
http://www.automationtechnologiesinc.com/products-page/cnc-router/kl-6090-desktop-cnc-router
Thanks
I agree that I need supported rails, I just have not found hardly any machines that have them. It looks like shipping will be 1/4 of the cost of the machine. Is there a better option?
Thanks
I have not found many machines with true linear guides like I want. Doe anyone have a list of other reasonable machines with a supported linear guides?
So it looks like the X6-2200L is the one to get? I really like the guides. Is there anybody that sales them in the US? Shipping was like almost $500. Is there any other comparable machines even...
I am looking to get a 3040 or a little bigger for my shop and was curious what the best of the cheap machines where?
Thanks
I am looking ot buy a cnc router in the 2ftX2ft range. I am cnc programmer and just want something in my shop to mess with. I have done a search and I am getting lost in all of the opinions.
I am...
I had my control box open this morning and took a look at the video connections one looks like an RS-232 but with more pens and then it next down after the board to a CRT J1 connection. Does anybody...
I also have a dynapath with monitor problems. Mine is a 20 series. Could you let me know how you connected the external monitor?
Thanks
Mike
Thanks for the reply, I should mention that the first job that will be cut on the machine will be 1" plate.
I am looking at getting a cnc plasma cutter and would like to hear some opinions. So far I have looked at the arc light dynamics and ezcut cnc. The machine will be used in a light industrial...
I am having problem getting the steppers to move any ideas, I am lost.
Thanks
Mike
When in mdi I call the tool with a T0103 for t1 offset 3 and it does not show up correctly for the absolute position. We have some older machine that will do this(O-T).
I am trying to assign a totaly differant offset to the same to for a differant operation. Instead if T0808 I used T0818. My problem is that that will not pick up the geometry offset numbers, How...
It looks like you are right. 6073=m46 and 6074=m47 but there are not any of those O9001 to O9009 in the memory. I assume that I would need O9003 for the 6073 call and O9004 for the 6074 call?
Where...
I am getting this alarm when trying to use M46 or M47 to accuate the pin and clamp or unclamp the tailbody. It will work in manual mode but no when programed. The machine has a Fanuc 21I-TB control...
I just started using a tree mill with a dynapath delta 20 control.
The only problem I have ran into with the machine function is the screen will run occasionally like an old tv set.
Is there an...
I was looking for a used foam hotwire machine to buy so I could cut the tapered wings for our clubs combat planes. I see some people are building there own but I prefer to buy something working.
Thanks for the help.
This is on a Mazak SQT250MY
When touching off a tool in the vertical live milling station the machine is giving me a 1109 alarm. The machine will touch it off shorter be that will not work. When the...
I have some parts I need to make they are 400 series stainless and have a M36x4 internal thread 47mm deep. I am on a Haas VF-1 with thru spindle coolant and am looking for the best tool for high...
We are trying to mill a chamfer around a crosshole with a g3x,y,z,r and it will not do the 3 axis move. This machine does not have the eia option, any ideas.
Thanks
Mike.
I am using the probe system for some part inspection and it works great. We are printing our own inspection sheet at the machine.
I would like to set this up so when the part is inspected the...