I found the owner.:banana:
Type: Posts; User: Mitsui Seiki
I found the owner.:banana:
Check your circuit breakers.
Is anyone in the LA area missing a big stainless steel part ?
It was delivered to us and I don't know who signed for it.
There's a number on it:
Enlin A/ SA182 F304L/ 304 600 B 16.5 S-808 7L8 EA...
Check the magnetic sensors for clamping.
Try this:
Press:
SYSTEM-PMC-PMCDGN-STATUS
But you need to know the address(Sensor#).
1= Active 0=Inactive
You have probably hit the hard limit switch.You should have a hard limit release button.
In order to get rid of the alarm you need to push that one and move the axis at the same time.Since you 've...
Try this.
http://ecat.secotools.com/
Search for a disc cutter named R335.10
At the ends you can do a simple contour with a 3/32 endmill ,working your way down to depth.
I'd use a slot cutter.
But it depends on if the slot is open or not,straigh or curved,tolerances,if there's enough room for it.
Hi.
I need to machine a O-ring slot with a dove tail cutter.
Tool Diameter is .057 and shaft diameter is .03.Depth of cut .054
Any ideas on speed and feed in Aluminum?Carbide and HSS tools.
Operations manager.
In MCX and OP manager , Right click on the tool then "Edit Selected Operations"-"Edit Common Parameters".There you can change Plunge and retract rate.
It means, true spirit,true heart.It can also mean ,genital! LMAO
You didn't say which CAM program.
You can swap the servos and try.
It's either a bad servo or the axis is sluggish.
Maybe bad lubrication.I've had it on a machine and it was bad way lubrication.
A company is like a chain,It's as strong as it's weakest link.
If I teach someone else what I know, if they ask for help, maybe that person doesn't have to struggle for hours to figure out what to...
Merry Christmas and A Happy New Year!!:):cheers::banana:
Yes,That's exactly what I mean.
You can get a very smooth surface if you do it right.
If you don't do it that way I think you need a custom chamfer tool.
Seco tools can make on for...
It can be done with a surface.
Like I said. It can't be done.It's a safety thing.
I was wondering.
Is it possible to use G31.
I don't think there is a parameter but you might be able (but you shouldn't!!)to override it by using Keep relays.
Why do you want to run the machine without the spindle running?
Maybe there's...
What kind of file is it?
Just put it in this line:
G83 G98 Z-0.588 R-0.171 Q0.063 P2000 F2
You need a G98.
Try peck tapping.Add a Q for the peck depth.
20.2mm?
It has to be M20x1.5.
M22 has a major Dia. of 22mm and M21 doesn't excist.
You can get a nut up M80 with 1.5 pitch.:)
Ok.
Take a look at Secos Minimaster tools.They are perfect for edge deburring.
Try these.
http://www.weilercorp.com/
Very good brushes.
In Diameter offset,do you have Geometry and wear?
If so ,do you have a value in Geo.and Wear or just in Wear?
You should have the value of half the diameter in Geo. and the -0.3 in Wear.
Make sure your insert is screwed tight.