Search:

Hi Tom
Yes, you were right, updated the version to the latest and the length of the tool from the table works in mm.


I edited the C program a little, I need the axis to physically rotate 90...

Hi Tom

I did, everything worked as I need in mm. For RTCP to work properly, I needed to enter the tool length in inches in the table.
That's why I asked why everything works for me in mm, and...

Thanks, the G 43 correction is working.


but this will need to be dealt with, since I always have a table and engine settings of a unit in inches, and a unit of working coordinates in a DRO in mm.

Yes, tools can be installed at both ends of the spindle.






Yes, thanks, this code works as I need.

Hi Tom
I ask for help in writing a tool changer script.
You already helped me with RTCP on this machine...

Hi Tom.
For a long time, trying to make the necessary changes in Kinematics5AxisGimbalAB file, but nothing happens, recompilation is successful without any errors, the changed values ​​in...

Hi Tom.

Today even reviewed all the options, and as I understand it in the tool table, the parameters are specified in inches, and I mistakenly ordered in millimeters, and turned on a long...

Hi Tom.
In the machine settings, I have spelled out 10 in / sec ^ 2, and the fact that I sent in the screenshot I registered for the test. If any settings if you change the angle acceleration axis...

Hi Tom.
Today checked on the machine.
The Test Version 4.34a does not start on a computer running windows 7 64 bit ultimate throws an error (0xc000007b)
On windows 10 64 bit Test Version...

Hi Tom.
Thank you very much for your support.
Checked Test Version 4.34a is in simulation mode, everything works as it should. But when I run Test Version 4.34a requires FTD2XX.dll file which I was...

Hi Tom.
I understand you, but I do not know how to explain how to engines should axis.
*Yet try ..
*If the axis B is in the 0 degree position, the axis A is rotated about the X axis. or by the...

Hi Tom. How are things going there to establish the kinematics file for my machine? Is it even possible to do it? Maybe there is some realties example that I tried to make myself kinematics with...

Hi Tom. Thanks for the help.
* Of course KFLOP write tags in the video!
With regard to kinematics, painted on the photo direction axes, think clearly will be the first B-axis rotates around the Z,...

Hi Tom.
I built a 5 axis CNC router running kflop. He wrote under the postprocessor without RTCP for Power mill Everything works fine!


I would like to know whether the possible means kflop...

Hi Tom,



Glad to hear it. Can you help me write a C program to Kflop, or can you have any examples of writing C programs to offset the Z axis. I can write a C program only examples, combining...

Hi Tom,
As C program will offset Z1 and Z2 axes? Just in time, or the offset with the axis X?
* if time is at a different feed rate X axis will be different penetration length offset Z1 and Z2...

Hi Tom, thanks for the help.
* Now I understand the structure of the construction program, if I even knew C # programming then no problems would write the program ... He turned to friend for help in...

Hi Tom,
OK, I will use a standardized description of the axes of the lathe.
I think that the feed rate should be uniform for the tool, and not for Z axis, but if one of the X-axis will do a...

Hi Tom. Thanks for the quick reply.



About the synchronization speed, too, is unclear. After all, the scheduler Kflop linear interpolation, as in the movement to add more slave axes and sync...

Hello. Help solve the problem: On a lathe has 3 independent Z axis in sequence on the same axis X.
I need to axes Z1 and Z2 copying but movement of the Z-axis offset by the distance between them....