The machine that arrived to us was without this and we needed about one hour to figure out what is causing this problem, and is quite simple at the end - delete xml file and create new.
Also, we are...
Type: Posts; User: LaserIdea
The machine that arrived to us was without this and we needed about one hour to figure out what is causing this problem, and is quite simple at the end - delete xml file and create new.
Also, we are...
In attachment. We hope this will help.
Best regards.
Hi, there is a very good guide for newbies for setup and is step by step, also we learned on a harder way, but i hope it will help to someone new.
Our USB 6040z is working excellent without any...
Hi Shizyo,
We had that problem some time ago, and the reason why this was happening to our machine was only belt.
We are not sure will this help You, but at least it not hurt. We hope that you...
Hi,
We are using probably the same machine and I also had that problem, for my laser the solution was to update vendor settings and machine settings.
These are the same files that we used for the...
Hello to Everyone,
Me and my friends have Chinese Laser ML-5030, with the tube power 45W :) , yes, the Company say it is 50W , but in any case, we are new to the whole laser story, we started...