Hello!
I have a CA23 HiCell 23 Lathe, and the turret will not index in Program or MDI mode!
The turret will index just fine in manual mode, however it will not move via program. It will get to the...
Type: Posts; User: caseybarsness
Hello!
I have a CA23 HiCell 23 Lathe, and the turret will not index in Program or MDI mode!
The turret will index just fine in manual mode, however it will not move via program. It will get to the...
Thank you!!
These will help fill in some of the gaps I am missing!!
I guess I should have specified this in my original post, my machine has a Seicos 16M control.
The manual you have works for...
Hello!
I am looking for manuals for my HG400 III Horizontal Mill.
I have been searching all over the web and cannot seem to track any of them down!
If anyone has digital copies they are willing...
Hello!
When following the maintenance procedure to adjust/confirm the zero point on my machine, I get a message saying "ADJUST. OF ZERO-PT.DOG IS REQD".
It says to refer to the operation manual,...
Update!
I was able to track down the information I needed!
The chuck is a Pratt Burnerd Gripfast quick change chuck.
Casey
I have a new to me 2002 Supermax FP100a VMC!
It has the 20k RPM HSK63A spindle and it is not gripping the tools tight enough.
You can see the machine make contact with the face of the spindle...
Hello!
I am the new owner of a 1994 HiCell 23!
It came without Jaws on the chuck and I have never seen anything like this before.
There are no Brand or Model markings on the chuck...
Has...
Hello!
I have a LB-15 that has been running great. After moving it ~15 feet, I am getting a "64 ALARM-P peripheral processor start 31" error when trying to boot the controll.
I have checked all the...
I just purchased a LC10 with the OSP3000 today! Could I get the docs from you?
Thanks,
Casey
Looking for some help with my new to me VS50.
It has the Seicos 18M control.
This is also my first VMC, so please let me know if there is something very obvious I am doing wrong!
I am having 3...
EDIT: I was able to resolve the issue using the P + CANCEL method.
I am seeing the same error code on all both my x and y axis!
I just moved the machine in and it seems that the axis we not...
Thank you for the replies!
I am sorry about the confusion with the accuracy component. I am looking for .001in accuracy, or 0.0254mm. I forgot to put units on it and keep falling back to my old...
I have been looking into building my own CNC mill for some time now. While doing research for that, I was lead to this forum!
I have read through several of the build post on this form and have...