584,814 active members*
5,434 visitors online*
Register for free
Login

Search:

Type: Posts; User: 1320feet

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    26
    Views
    3,211

    re: Machine will not move g41 g42

    98% of what I do is climb cut. I use G42 to make a bore larger with a positive number in the control is all.
  2. Replies
    26
    Views
    3,211

    re: Machine will not move g41 g42

    To setup a boring bar is time consuming. To add a reamer to the tool changer also adds time. I almost always have a 1/8, 1/4, 3/8, 1/2, and a 3/4 endmill in the tool changer. So I grab one of those...
  3. Replies
    26
    Views
    3,211

    re: Machine will not move g41 g42

    This is how I use to do it. It was very time consuming when reloading large files into the Mori though a serial cable. So I now make the hole in Mastercam .001 to .002 smaller than I need. I then cut...
  4. Replies
    26
    Views
    3,211

    Re: Machine will not move g41 g42

    If you had to finish a bore that was to be .500 plus or minus .0002 with an end mill, how would one get there without offsets?
  5. Replies
    26
    Views
    3,211

    Re: Machice will not move g41 g42

    One thing I never mentioned is I'm using cutter comp for fine tuning a dimension. I am using Mastercam for the main cutter offset.
  6. Replies
    26
    Views
    3,211

    Re: Machice will not move g41 g42

    This worked and the comp was engaged on line N830.
  7. Replies
    26
    Views
    3,211

    Re: Machice will not move g41 g42

    If I change this N820 G0 G40 G90 G56 X10.6931 Y-2.9598 S10000 M3
    to this N820 G0 G40 G90 G56 X9.6931 Y-2.9598 S10000 M3 it will move to the same position as the previous line watching...
  8. Replies
    26
    Views
    3,211

    Re: Machice will not move g41 g42

    It is still in G0 so no feed rate is needed. I thought N830 should move the .05 I had in radius offset. G8 P1 is turning on high speed look ahead.
  9. Replies
    26
    Views
    3,211

    Re: Machice will not move g41 g42

    The G40 was not there when I started. I had entered it after to see if it made any difference.
  10. Replies
    26
    Views
    3,211

    Machine will not move g41 g42

    My machine will not move in cutter comp today.
    I inserted .05 for tool 3 in radius offset. I then watch the machine coordinates between line N825 and N830 and nothing moves.
    Machine is at X-11.1416...
  11. Replies
    15
    Views
    2,102

    Re: Max spindle speed

    472468

    - - - Updated - - -

    472470472472
  12. Replies
    15
    Views
    2,102

    Re: Max spindle speed

    Why?
  13. Replies
    15
    Views
    2,102

    Re: Max spindle speed

    The machine has a 4500 RPM limit in its specs from Okuma.
  14. Replies
    15
    Views
    2,102

    Re: Max spindle speed

    I would like to move the limit from 3800 to 4200 and I get the error seen in the attached photo when I try. Is there another parameter else where?
  15. Replies
    15
    Views
    2,102

    Max spindle speed

    I have a captain 2007 L370 with osp-p200l control I recently change the chuck on. Went from a Kitagawa BL210 to a B-210. This B-210 is rated at 4200 RPM and the machine user parameter (allowable...
  16. Replies
    5
    Views
    997

    Re: Okuma open door message at startup

    I needed to be in manual mode. Thanks OkumaWiz.
  17. Replies
    5
    Views
    997

    Okuma open door message at startup

    On start up, the screen displays (please open door). It does not unlock the door. This is a newly acquired 2007 L370 with P200L control. It was setup with auto door and a robot. Robot is now out of...
  18. Re: Frustrated with Mori SV500 spindle unlocking on M00

    Hi Dave.

    Thanks for the explanation.
    I have book marked that link.

    Thanks
    Howard
  19. Re: Frustrated with Mori SV500 spindle unlocking on M00

    Hi gentle

    Here is the order of the buttons I pressed.
    system
    pmc
    pmcprm
    data
    g.data
    page down several times.
  20. Re: Frustrated with Mori SV500 spindle unlocking on M00

    I broke down and talked to David at DMG Mori. He was able to resolve this within minutes. I changed parameter K461 from a 3 to a 1. Hopefully this will help the next person.20191016_110948.jpg430934
  21. Re: Frustrated with Mori SV500 spindle unlocking on M00

    Thank You Gentlegiant. You got me looking in the right area, me thinks. I have not found 1 setting between the 2 controls that differ as of yet. Thanks again.
  22. Re: Frustrated with Mori SV500 spindle unlocking on M00

    Hi Gentlegiant
    I never mentioned in the 1st post that the door unlocks at M00 as well as the spindle releasing. The door and spindle does not unlock on the other machine.
    I found the following in...
  23. Re: Frustrated with Mori SV500 spindle unlocking on M00

    Hi Gentlegiant. I have compared the 2 parameter lists and I was unable to locate anything that was obvious. I've never done anything with the ladder before. I believe that's where I need to be. I...
  24. Frustrated with Mori SV500 spindle unlocking on M00

    I have 2 1998 mori seiki sv500s made within a month of each other. I have a haimler taster as tool #1 for setting work offsets. I use it to adjust offsets on every part sometimes. following will be...
  25. Re: Coolant questions, tank capacity SV400 SV500

    My SV500B maintenance manual shows SV500B coolant capacity at 400 liters or 105gals. I Do not have a book on the SV400.
    I have used both Oemeta novamet 100 and Blasocut BC940 and they both eat the...
  26. Replies
    2
    Views
    1,406

    Re: NV5000 disabling 4th or 5th axis

    On my SV500 with 4th axis and 18IA control. It's parameter 12 on line A that I change bit7 to a 1.
  27. Re: Willing to pay for pictures and a little info about Mori SV-50 front door harwar

    This is from a 1998 SV500. The gear has 17 teeth. I'm unable to measure the diameter without disassembly. I was able to measure the width between the racks at .930". ...
  28. Replies
    0
    Views
    817

    1998 SV500 vs 2007 NV5000

    I have a SV500 and I'm looking at a newer NV5000 and was wondering if the NV is as rigid as the older SV machine? The Z axis column to me on the SV machine looks to be far more rigid in its design.
  29. Replies
    7
    Views
    1,267

    Re: Looking for Ct40 tool changer claws

    Thanks for the interchange Underthetire. I had no luck finding a used pair, and for what its worth I was quoted $762.00 each from Ellision. I ended up building my own.
  30. Replies
    7
    Views
    1,267

    Re: Looking for Ct40 tool changer claws

    I ended up making my own set. I ran them on my old machine ( AWEA AV1000 ) as that was easier than changing all the tools by hand on the mori.
    307744
Results 1 to 30 of 49
Page 1 of 2 1 2