CAMWorks was updated at work recently. Went to program some parts today and noticed that the AFR feature did not appear. Is there a reason we would not have the feature? Do I need to enable it in a...
Type: Posts; User: captainDL
CAMWorks was updated at work recently. Went to program some parts today and noticed that the AFR feature did not appear. Is there a reason we would not have the feature? Do I need to enable it in a...
If you are drip feeding off of the shoplink and using high feedrates, the control has a hard time keeping up with the axis movements. I believe "exact stop" is the default setting in most post...
Got back to trying the rotary this afternoon. I do have an axis controller card but no action out of the rotary. I now get a different alarm with each rotary. One is Error #1 and the other is Error...
Lakeshore Tool Service
1209 Park Street
Chilton, WI 53014
End mill, drill, countersink, woodruff cutter, step drill, etc. resharpening service. Split point drills. Helical point drills.
Anca...
I checked the sales sheet for the machine and it lists a "4th axis pre-wire only". Does this mean that the boards need to be modified?
Thanks,
Dan
Good afternoon,
We got 2 VH65 rotary units with our VMC4020 we purchased a few months back. I got to trying them out this morning, without much success. I got the set up page changed to recognize...
Hi everyone. Going to be doing a job that requires drilling a 1.015 diameter hole thru a 2.5 " 1018 block. My question is, I don't have thru spindle coolant, should I peck this drill or try drilling...
Thank you for the response! I will give that a try.
I've just started working with a Fadal VMC4020 with the 88HS control. I have a couple questions I would like input on.
First, we would like to set tools using a standard block/gage on the table...
RFQ will close at 5 p.m. C.S.T. on Friday. Thank you for your interest in the work.
Hello,
I have several parts I need made. Please include material, labor, and shipping to zip code 53083 in your quotes. Please advise best lead time as well.
DWG466 I need 1 part. All other...
Thank you to everyone who quoted. I have selected a shop to mill these for me.
Good Morning. I am looking for quotes on the machining of the attached part. I would need quotes for 2,5,& 10 pieces from A36 steel. Parts would need a 125 finish all over. Please include an...
Just to clear up confusion, the shape on top is a diamond shaped boss not an angled slit.
Thanks,
Dan
Good evening,
I need a quote for 2 small stainless pins. OD should be .086 +/- .0005.
Please PM with quotes or questions.
Is there any way to open a file created with Alibre with Autocad?
Thanks for all the advice so far. So what I'm understanding 4140 isn't a good choice? I only need to harden the races not the entire rod. 8620 may be a better option. Will 4140 case or flame...
Hi everyone. I am going to be making a set of connecting rods for my snowmobile engine. I need a shorter center to center distance so off the shelf isn't possible. My question is: If I machine...
Thank you for your well stated opinion. I in fact am not sucking up to get this job. Judging by your $8 quote I am pretty sure I won't, so please continue bad mouthing anyone who doesn't agree with...
I don't think criticizing a potential customer is a good way to get work. I thought his original post was clear as to what he wanted. $8 per part? You must be donating your labor! I can't believe...
How long will this RFQ be open. Please let us all know.
Thank You,
Dan
Has anyone heard from laserray? Did anyone get this work? Just wondering.
Dan
Has this job been awarded or is the RFQ still open? Please let us all know. Thank You very much.
Dan
PM sent! Thank you!
PM sent. Thank You for the opportunity!
PM sent.