Hi barkster, the owner of the youtube video tell me there is not solution, because the system is what it is.... but is not true
The chinese mind work different than us, look the position of home in...
Type: Posts; User: otromar
Hi barkster, the owner of the youtube video tell me there is not solution, because the system is what it is.... but is not true
The chinese mind work different than us, look the position of home in...
I dont know if you follow the right procedure in vendor setting then i refresh :
go vendor settings
press READ (then the software read parameters from controller)
just right now you can modify...
Hi Gene, YES !!! is very useful (at least for me). In other softwares, you need to draw, save as dxf, then open software of laser cutter and import dxf... now, you draw in corel/autocad, then SELECT...
Ok Nolan, seems that you have a lot of knowledge about ruida controllers. Can you help me with this ?...
Hi Klaus, Ruida have you own site with all the manuals http://en.rd-acs.com/down_complex.aspx?FId=n14:14:14
Some manual have really UGLY english version, but al least some circuit connections are...
Hi Nolan, the air assist if not conected to anything ? Can you tell me what controller are you using with RDwWorks ?
Martín.-
Hi everyone, when I installed rdworks, I installed first the "laserwork" mode and then "corel" mode, to have the option to launch RDWorks from my own hand and from coreldraw inside too
But, when I...
I realizad after post that there is not the right place for this post. Sorry. Please, administrators, can you move the post ?. Thanks
Martín
There is a new subversion (8.01.18) of RdWorks. At a...
No response from ruida, no response from seller at aliexpress...
No response here... anyone with a 2 fixed head laser cutter and ruida 6442 ? At least i want to know if other have the correct...
Most of PSU, if you press the TEST button, ignore the water protection.
If you dont have response, need to divide the problem :
1 - Do you have a ammeter between PSU and tube ? there is usefull...
bypassing water protection is at your own risk... be shure that the water is really running through the laser tube...
some PSU have a button for test, this button ignore the condition of water,...
in case of failure, all help and first aid given would see that the same machine, so the diagnosis menu, which for example indicates if any waterprot activated. Should give an alarm, but if for...
Now i have my 6442. Looking carrefully, the label of each led is in the front of controller
led 15 +5
led 14 run
led 13 error
etc
323712
Someone take a look of item diagnosis in the lcd ?...
Hi Kezza
try ecut
Martin.-
I tell you what I understand : there is a option to "set" 4 location in your laser cutter.
I use to work without absolute coordinates, i put the laser head where i want and start from this point, if...
Hi JaredNem, Iam not sure if the V8 support corel x8 ... are you checked this ?
And I have working macros of V8 in coreldraw X3 and X6 and that is what i found :
the archive .GMS is installed in...
Maybe some photo collage help323356
Hi, I posted before while waiting for the new controller (rdc 6442s) for my 2 fixed head laser cutter.
Well, the new controller is already running including the wireless remote controller, but, of...
Please, you need to post more info.
Is Autolaser do the job in a normal way anytime ? or for the first time es reversed ? just text or any figure, rectangles, etc ?
When you do a "home" you will...
Sorry, saRbarmultimedia : https://www.youtube.com/user/SarbarMultimedia
Martín.-
Are you checked the lens (dust or cracked) ? if you dont find any strange and the lens are clean, rotate then (not flip, always the round side is up, just over the vertical axis)
And if you change...
Looking your laser, I remember that i want to retrofit mine, and one thing is to put the lasertube over the gantry. I think in the fisical integrity of glass tube because of vibrations and movements....
- To much power, try lowering the power, try, if not result good, lower again.
- The nozzle need positive pressure of air. There are diferent oppinios about how much pressure you need. Search and...
Hi, right now, in my machine (golden laser), the propietary software dont let me change frecuency
I am waiting a new control that i bought in china (ruida rdsc6442s) that allow me to change a lot...
Hi, I Martin from Argentina.
I have a goldenlaser with two fixed heads, and software is really bad. And without support (chinesse and either local)
Then i purchased a RDC6442s in china, right now i...
Hi FizDinzeo, maybe too high velocity between lines ? This vel is set in system parameters.
Martin.-
The transparent acrylic or policarbonate of your laser door is enough. If you can work with the open door (cheating your machine), buy a simple safety glasses.
Sam's Laser FAQ - Carbon Dioxide...
Maybe Marco or Nolan can tell us what this 15 leds means ... ?
Martin.-
jejeje i sorry, a mix of spanish and english !!! Before do something with the leetro mpc6585 think in other parts like drivers and motors ...
And all this controllers dont "eat" gcode, a lot of...
I cant find the meaning of leds, but i remember that : panel control => Z/U button => Diagnoses+ and then show you some limited items. Maybe find a clue there...
Martin.-