Search:

On my computer I have a folder named Manufacturing in it is another folder named part numbers in it are individual folders for all my customers in them are a master folder for the specific part...

Rough it out leaving .010 stock per side on side walls with a 3 flute hss rougher designed for aluminum. Take your 3 flute carbide tool and run around 1200 rpm 5ipm for finishing.

Awesome, glad it worked out for you.
Bet it gives you lots of confidence now in taking those jobs no one else wants in their shops.

I used them before years ago on a Haas VF3 ran 6000rpm 10inch per minute about .005 deep.
The ones I used seemed to have a much sharper point.
We ended up switching over to 1/32" 2 flute carbide...

No I don't. Every vertical mill I ever ran never had a tool setter.
Our horizontal mills have tool setter and probe. The tool setter finds tool gage length from face of spindle to tip of tool. ...

Sandvik Coromant Online Product Catalogue
Click on Search for Product tab on left and key in tool number.

I'm assuming your machine doesn't have a tool setter.
Set your tools off a surface that will never change. Ex. Back of vise, off top of 2-4-6 block on work table.
And use a test indicator to...

The hardened 410sst was a small order of around 20 parts used 1 broach. the 6al4v job was a bigger order of 100pc used 2 broaches.
Like Florida said make sure you have a good 45 degree chamfer to...

Our shop in the past two years have just bought 10 new lathes (mazaks) and three vmills(2mazaks and 1 haas) we are now machining for oil and gas industry. that is the reason we needed more lathes in...

.031 wide x .031 deep

I'm a Programmer/Machinist. The company I work for went from producing parts just for the semiconductor industry to semiconductor and oil and gas industries.
Needless to say we got swamped. Our...

I'm at home and don't have Mastercam in front of me and haven't did any 3D work in a while.Sounds like when you are selecting the green you might be selecting the entire solid body.
Just select the...

I broached some hardened 410sst and titanium 6al4v used slater tool rotary broach on Haas SL-10.
HSS broaches worked the best. cobalt too brittle and chipped. I drilled hole on high side of...

Free 3D CAD Library and Collaboration Tools for Engineers - GrabCAD has bunch of stuff. you just need to register.