Hi.
Can somebody help me with giving me the right parameters of a BEST FC300 Inverter for 5.5KW / 380V spindle ?
I"m in a deep trouble. Every help will be highly appreciated.
Type: Posts; User: bivegele
Hi.
Can somebody help me with giving me the right parameters of a BEST FC300 Inverter for 5.5KW / 380V spindle ?
I"m in a deep trouble. Every help will be highly appreciated.
Hi.
I live a real nightmare. I use a 1325 standard chinese cnc machine with a 5.5kw spindle. Z axis loses steps all the time , mainly after changing a bit.
These are my parameters. Can you help me...
Hi. I use a 1325 Chinese router (Sunrise brand). Which Vectric Aspire post processor is compatible for ncstudio. I tried NC-Easy but it makes errors.
Hi guys,
I've purchased a chinese 1325 CNC router with NCStudio card. Can somebody help me modify the Machining and Manufactory parameters ?
Thanks a lot Bro. I right now go to my workskop to do that.
I apologize for that oversight. Thanks for your concern. These are the informations about my VFD and my Spindle :
Spindle spec's
Kw 1.5
Amps = 5 A
Hz=400
Voltage=220
VFD Drive (Fuling...
Thanks for your concern. These are the informations about my VFD and my Spindle :
Spindle spec's
Kw 1.5
Amps = 5 A
Hz=400
Voltage=220
VFD Drive (Fuling brand) spec's
Voltage= 220
Thanks for your prompt answer. I agree with you that rigidity IS the issue. Anyway I'll try that technique with tender then see if I Can deal with it.
Hi everybody.
I have a 1200x900 chinese cnc router that works pretty well.
I intend to make doors and furniture like those on the attached pictures....
Hi guys.
Please can somebody learn me how to definitely get rid of ncstudio limit switches problem.
I have never succeded matching the cross on the simulation screen with the origin of the work...
Hi guys.
Please advise me.
I've a chinese cnc router that works rather well till now. Due to manipulation mistake, I've lost one of my three leadshine DMA860H drivers. But in my country, Cameroon,...
Hi.. My chinese router is a 900x130cm but for any work, the trace is out of the limits. Can somebody explain me how to parameter in NCStudio so that the G Code can respect the working area of the...
I'm the owner of a chinese cnc router that works quite well. In Cameroon we have electricity cuts all along the day.
1- Very often, I face electricity cuts while the cnc router is working. I'm...
Hi bro.
I finally found taht the nc studio card delivered only 3.5 v to the machine and replaced it. All the axis behave nively.
Just a little problem. when a make an engraving test, I loose...
I have replaced the switched mode power supply that was dead by a new one and it helped me to have control on x axis. But as I said earlier, y axis move right but VERY slowly, and so is the Z axis...
Thanks for your kind reply.
Since my firts post, situation ahce changed.
Now I have control on X axis but Y axis moves right but very very slowly; z axis also and additionnally it only moves up,...
Hi Tonny.
It seems we have the same problem. My chinese router have been working pretty well since 2 years. But yesterday I satrted the router, opened ncstudio ; the spindles turns well in command...
Help guys. My chinese router worked pretty well til yesterday. The spindle motor turns well on command but now I can't move in any axis in NCSTDIO.
Hello guys.
I'm in deep trouble.
I have a chinese router that worked pretty well, But this morning I started it as usual and the spindle turns, but I can't move the spindle in any axis.
What to...
Hello buddies,
I lost my fuling inverter DZB200 series because of uppervoltage (Electricity in Cameroon is a mess).
I ordered a new one but the seller sent me a DZB300 series. Can I use it with my...
Hi guys,
I'm from Cameroon, and I own a 900x1200 chinese cnc router that works quite well.
I've been warned by the builder to work at 6,000 rpm but the spindle speed is programmed at 10,000 rpm in...
Hello everybody. I'm Xavier from Cameroon
I use a Chinese CNN router with ncstudio since six months and it behaves pretty good. I made a mistake by using the spindle at 15,000 rpm.
After...
Hi everybody.
I purchased a Chinese CNC router but I received no installation instructions, and the softwares I was given are corrupted (NC Studio an Artcam pro 8.1).
No way to make the computer...