Yes I tried "7" and "9" also, found on another post. About 1 out of 5 times I am getting "b" when holding "-" and "." On power up. Very strange not being consistent. Most of the time it's "o".
...
Type: Posts; User: cmtas
Yes I tried "7" and "9" also, found on another post. About 1 out of 5 times I am getting "b" when holding "-" and "." On power up. Very strange not being consistent. Most of the time it's "o".
...
Please understand I am not at the machine now, so I had my friend do the power up holding the "7" and "1". Then power up holding "-" and ".". At no time did anything show up on the monitor. However...
As I said earlier, IPL mode is not accsesable. There is no screen output. Memory clear has been performed several times. I will try again. Be aware this system is Fanuc 10TF with Fapt, I don't know...
When first booting display shows several different letters very quickly (i believe this is normal), always ends with small "o" as pictured. All segments are working during boot. None stuck on or...
Yes I have backup. Confirming it is small "o" not "c".408246
Screen is blank. No response to try to get to IPL mode. pulled battery to clear memory (30 minutes). Always shows small o on 7 segment display on main board.
Screen is blank. Monitor is on with only garbage (lines no text). When the fiber optic cable is unplugged from CRT/MDI controller, red lights appear on controller. Otherwise one green light. I did...
A friend of mine asked me to look at his Dosan CNC lathe with Fanuc 10TF control. What I found was a undocumented system alarm on the main board. It is displaying a small "o" , not to be confused...
Need NC parameters and diagnostic parameters for Clausing Colchester CNC 2000 lathe with 0T control. Can not find machine information plate with date and serial number. Machine has no turret, tools...
Have a E60 error on my Allen-Bradley 2098-DSD-020X-DN Ultra3000i drive. Has any one seen this before? I can not find anything about this error. My local A-B tech was stumped. Ultraware sees the drive...