Granite devices is releasing the new IONI servo drive and is offering some great deals on their Indigogo campaign. Check it out if you're interested.
The campaign has already reached it's goal,...
Type: Posts; User: jschulze
Granite devices is releasing the new IONI servo drive and is offering some great deals on their Indigogo campaign. Check it out if you're interested.
The campaign has already reached it's goal,...
Glad you got it figured out.
Sent from my iPhone using Tapatalk
Here are the settings that worked for me. Should be all the same as the factory ones.
245970245972
Sent from my iPhone using Tapatalk
I'll check when I get back to the shop and let you know.
Sent from my iPhone using Tapatalk
I installed one on an xp machine without issue. Maybe just make sure the ess and the network adapter are on the same subnet.
Sent from my iPhone using Tapatalk
http://warp9td.com/documentation/ESS-TroubleshootingGuide.pdf
I'm just using the standard screens set at the moment. It's not ideal I guess, but the code runs just the same. I just use M3 for torch on and M5 to turn it off, no torch height controller on this...
I use mach3 to run the machine and sheetcam to make the tool paths. I designed this machine to handle a max of 6" diameter.
There's a rotary post for mach3 that makes it pretty easy. When doing...
I'm out of town at the moment and I don't have a photo of the internal mechanism, but it is really simple. I attached a photo of the back of the carriage. The small top pulley is attached to a...
I was able to cut up an 8' piece of tubing with only the front support, but cutting a bit slowly. I think if I really cranked up the speed it could possible start whipping a little bit
I was thinking about adding rolling tube supports. I just need to figure out how to make them quickly removable when the chuck gets close to the front of the machine. I'll post some pics of the...
Hi,
Here's a CNC plasma tubing notcher I put together. It'll take a 144" length of material. It's a 4 axis machine(x,y,z,a) I added the additional axis so I could eventual cut square and...
Maybe try some really simple commands in the MDI window. Just move jog the torch to the center of the table and zero it. Then just do a g1 f30 x1 y1 or something really simple to make sure the...
Here's some shells that I'm making. The rig I'm turning them with isn't CNC, but hopefully will be in the near future. I'd like to be able to do carvings, drill holes, integrate lugs, etc...I just...