Search:

Hello,

It seems to be a bad wiring, refer to your motherboard manual for wiring diagram Generally the Low Input is connected to TL port (sencod on the PSU) Water protection on the third , ground...

Hello!

I bough Mine vía [email protected] (Red Sail Iris) she answers quickly (take in account that shes based on China) and I bought One machine, Supplies and I'm about to place another...

Hello Litleboy,

As you should have see my other posts in problems with Redsail Machines I will make the followring comments:

1.- Redsail Machines are Cheap, that means not only low cost...

Centon1 and Goolgaul,

I've solved the problem with my machine following the procedure I've described.

I've found a broken wire from the interlock key switch in the front pannel to the Laser...

Centon1,

I'm making some continuity tests to check the wiring, I have a wiring Diagram (or something like that) for the LS-240A Controler, it says where should be connected each component. For...

Hello CDFracing, did you solve your issue? I'm having the same issue as you did.

Hello Goolgaul Thanks for your Quick Response!

I've just tried what you said, mi internal microswitch is well fixed to the machine and it clicks propertly, I tried with the hand and nothing...

Tomorrow I will tell you the truth, i'm waiting for the response of the supplier. I'm having a big problem with a Red Sail Machine.

I have 2 weeks with a machine and still I cannot make it Work....

Centon1, I have the same problem as you, with a M500 60W red sail machine.

I've discovered the following.

If you go to Jog Settings and set the Power 1 to 100% for example, then accept and go...