I've been having this problem for awhile now and I can't figure out why this is happening. I don't know if it's human error or machine error. I have included some pictures of the problem I'm having....
Type: Posts; User: darkclown
I've been having this problem for awhile now and I can't figure out why this is happening. I don't know if it's human error or machine error. I have included some pictures of the problem I'm having....
Yeah that was one of the things I was hoping somebody had a better way to do it on the profile cut out instead of just going down in tiny increments.
I appreciate your guy's help.
Ok I'm a little new at this so forgive if this sounds newbish. I'm cutting these spinners from 4" x 14" x 1/4" single piece of aluminum.
I use fusion 360 to design the spinners then I import it...
I was hoping someone here could help me with my problem. I have been making wooden Fidget Spinners for awhile now but have decided to try and make some out of 6061 aluminum. The problem I'm having is...
OK so I took your advise and cut out a square and measured it and of course it was off on the measurements so I re calibrated it and adding in the updated measurements and cut out a new square. So I...
OK so I did what you said and re calibrated in mach 3. The circle that was coming from my machine was way screwed up so I had to adjust both the X and Y axis. After doing that I did a couple test...
The feed rate and plunge was fine for the wood but I haven't cut any aluminum yet. I wanted to make sure everything was cutting correctly before I started on aluminum. I have 2 sheets of aluminum 4"x...
I cut out the spinner using your g code and it came out almost perfect about .2mm too small. The material I will mainly be cutting through is 1/4".
I did switch to a 4mm end mill and just did a...
I had calibrated it before but I decided to do it again. It came out perfect, it moved exactly how far it was supposed to and the X, Y, and Z steps were what the manufacturer said they were going to...
I know this is another circle problem but I have searched through this forum and still haven't been able to solve my problem.
First off I make Fidget Spinners out of wood. I use Fusion 360 to create...