It00273 what format is your 360 drawing saved in???
Type: Posts; User: service_75
It00273 what format is your 360 drawing saved in???
if spindle is oscillating a bit on orientation around encoder index flag m19 then parameters in bmdc may not tuned...correctly which gives not up to speed error < velocity sample rate...
can i ask what control you upgraded to?
I have the same machine as well... I have only been messing with it for a little bit but have noticed vetric has post processor and also artcam... I use a dnc program to download file and you have...
Hello just wondering how your making on with centurions... I to have a partner 1 and love it no issue here, I did how ever upgrade all electrics and still have motors and old cpu kicking around with...
For the most judging from the age of most parner1s era this machine don't owe anybody anything, alls I did to replace my wire was use old ones like said to pull in new ones of which break the tye...
Wigitmaster from eric in florida??? if so do you have a bugit??? because I bought s mall table top from eric a few years ago not cheap but good machine... never the less I don't use it and had...
When I contacted them it seemed as though the women didn't seem to have an issue with providing information but after a few calls I gave up... im sure they get calls everyday, I would say give them a...
Hello I'm located in Cambrdige Ontario, I have a few machines ready for this work. let me know if you are still in need
This machine runs off a proprietary stepper motor controller of which was a combo of hardware and software and key, the unit will not function with mach3 only because of interface issues the lpt port...
Are you using a vfd and if so does it have a parameter for ramp up internal to vfd???
Im at a lose as to how your plan is .... I guess the main thing is the transformer of smaw would not be the issue in this pic? the transformer if secondary common tap for windings is for balancing of...
Im not familiar with your machine but my guess if its like other bp machines there are different configurations for machines and a basic stamp for the basics of all machines etc... your white button...
Does the machine move otherwise, if you can jog all axis then how can there be issues with drives. I would not try to switch cables around unless its the last resort as I have smoked good drives...
I hear you on that issue, as im in the same boat... its been a bit since I looked at the packaged servo dynamics drives and power supply?? I called them direct and spoke with some woman and told her...
just a question I have is are you using usb devices like a key board or pendant< when mine gets wet especially the keyboard all responses from machine are lagged just like your saying!!! key logs...
Win xp pro service pack 2 fresh install, disable automatic updates and windows fire wall and screen saver and using intel p4 cpu works well for me no issues, three years running two shifts mach 3 is...
Seems as thought a dip switch was wrong on the drive works good now, thanks for any views.
I seem to be able to change direction just by changing step and direction pins on ports and pins for motor output but yet when I jog it will only go 1 direction or the other with the change but not...
Hello I have an issue with a computer that is setup with smooth stepper and has three ports 1,2,3. there are x,y,z,a axis enabled in mach and x,y,z all turn properly but "A" doesnt. I have checked...
Thanks
I have a detailed book on cypress for mach3 so I guess I better get to lots of reading, if and when I get to reading if there are any questions I have, could I phone you and give you a couple paypal...
Ger21 can you tell me is it better for me to try and learn Cypress enable or V.B for the purpose of learning macros in mach3. I understand electrical logic and wireing etc.. the issue Ive had for...
So how have you made out with the macro for the tool changer, I to have the same ideas as well and dont know where to start. it seems as thought everbody on cnczone knows how to use V.B script and...