Sure there are many ways to skin the cat,
One would be to make chamfers before the threading.
Other way would be to run the cleaning pass with threading tool again after the main treading and...
Type: Posts; User: brfgmike
Sure there are many ways to skin the cat,
One would be to make chamfers before the threading.
Other way would be to run the cleaning pass with threading tool again after the main treading and...
Slow things down especially the feed and depth of cut.
Plenty of coolant and keep in mind that stainless is self hardening if you raise the temperature to certain point.
Your parameters are way...
T
Drill, or boring bar holder, round tool in general. Those type of holders were typically used on swiss-screw machines and some turret lathes. Older technology before the cnc, but still useful....
Wouldn't it make sense to add your youtube name and link to the videos.
Just a suggestion.
Sent from my iPhone using Tapatalk
I doubt that thread conventer will be the right approach.
If it would be me, I would want to replace the back plate of the chuck you are adopting.
There is a good chance that the chuck has a...
A CAD-CAM software would take care of that.
Sent from my iPhone using Tapatalk
Check ebay. there were few places that same and rebuild fanuc boards.
Contact before and ask about warranty. They are on ebay but they are not some average Joe's.
Sent from my iPhone...
I would like to put this head back to work but I can't find the inserts. Kennametal said it is not one of theirs.
If anybody have an idea please let me know.
Thank you.
349842349844349846
...
On the last line of the program when you return the turret back to G50 location try X20.0 W20.0 minus the part off amount in Z Turret will return in incremental.
Be careful I am not an expert but...
I do have programming manual for SL-3 Fanuc 6T.
It is not Yasnac but program should not be different I assume
PM me with your email and I send it to you.
Congratulation, and good luck with your...
Good info about spindle noise.
How is that exactly causing noise. Shouldn't belt run nice and happy in any position?
How one would ever know how to position new belt if replaced.
Just curious....
Lanemfg
I appreciate your input.
Backhoe pins do not rotate very fast. Here is a link to some studies if you care to know some more. ...
I can make one for you no problem please keep in mind that stainless steel although rust resistant is surprisingly not wear resistant. If it is subjected to friction it will wear. I refer to. 980...
Well if you can see their store listing and they have a website and phone numbers to call. I don't think it gets any better. Call in ask whatever you are concerned about and go with your gut...
In regards to your machine I can't help you and I don't know if there is a lot of people who can but keep searching forums. there must be some on out there who use to run those and perhaps they may...
Take the numbers from power supply and search ebay
There are few sources there that not only dealing with second hand parts but you can find that they specialize in repair of the boards and Fanuc...
I sent you a private message
Sent from my iPhone using Tapatalk
Perhaps marking the position of the spindle motor pulley as it sits when orientation of the spindle was performed. Loosening up the belt and adjusting spindle position so the keys are aligned...
Search here or Google Acramat 2100 spindle orientation problem.
I found few threads about it on Cnc zone and practical machinist.
There are few suggestions there. from parameters all the way to...
I had a problem with spindle height position during the tool change but it was due to the battery going bad and machine lost the memory of its zero position. Because of that I had to go back set the...
What kind of control your machine is equipped with?
I have some instructions for Fanuc Oi Mc
Sent from my iPhone using Tapatalk
Jon
Thanks for reply
I know what I am talking about, since I own HSMWorks since 2013 I had plenty of conversations with the support. You can turn basic stuff pretty easy and it will look ok. You...
AutoDesk HSMWorks SUCKS in Turning
Hello to all,
Does anybody of you use HSMWorks Turning?
If yes, why nobody is talking about how much it sucks. I am sick and tired of taking to HSMWorks...
I sent you a privet message with my phone number if I can help give me a call its much quicker
Sent from my iPhone using Tapatalk
Ok I understand , I am not familiar with your machine, but have you tried doing it the way I described without the memory protect part ?
Try to do this
Select MDI, turn the memory protect key to off position, hit the command button, look at page number , hit the next page to be on the page 2.
type the command : S key than 500 and...
I think I can help you, send me a PM with you e mail or phone number.
What version of a BC are u using ?
Mike
I think I can help you, send me a PM with you e mail or phone number.
What version of a BC are u using ?
Mike
As said before, plastic molds must be polished to a mirror like finish, or it would reflect any imperfections. Even in small production line which i assume you thinking about it would take a lot of...