Search:

In Jog Mode you should see the M41/M42/M43/M44 is active. Gear L means low gear. It seems none of the gears are active and the spindle is out of gear.
There must be a way to change the gear manually...

Hello Arindam,

There are four possibilities: A blown fuse on the CNC Power Supply, A damaged Power Supply, A damaged screen, or a damaged CPU.
The power supply is installed on the back of the CNC...

Edit a new program with any name and type these lines in.

PLCI is integrated PLC as oppose to PLC64 (External PLC unit).
Fagor PLC Program (with or without PLCI) is written in the CNC and can be downloaded from the RS232 port.
The PLC Program contains the...

9998 is a start subroutine for any conversational program and 9999 is the end subroutine.
Write a program with following contents:

(SUB 9998)
(RET)
(SUB 9999)
M30
(RET)

these two...

I would ask the machine builder to provide the subroutines.

The subroutine number is stored in the General Machine Parameter REFPSUB (P34)
The subroutine contents would look like:

(SUB ....)...

Hello,

By changing the general parameter P8=INCHES to zero the machine would work in metric mode. After changing this parameter you need to restart the machine.



For the second problem, try...

Here is a quick step by step RS232 communication document:

http://famatechnology.com/cms/wp-content/uploads/2014/07/WinDNC_RS-232.pdf

The cable must be shorter than 15m = 45ft and it must be...

Hello Edward,

Does the CNC have a PLC64 (External) I/O unit?
The PLC64 unit would be connected to the main 8025 CNC through the RS485 port known as LAN.
The unit should have its own address...

An article that explains about Accuracy and Tuning in CNC Machine Tools.

The Portable Handwheels on Quintax Machines have 24V IO connection and the 5V or 24V pulse outputs.

A few questions:
1- is this a 5V handwheel or 24V?
2- What is Connector Number that the...

It seems you have the highest possible version on your Hardware platform. To have the second level of ISO and so many more features, you need to upgrade your CPU.
FAMA Technology is a Fagor...

The Program seems to be ok. Could you please explain what doesn't work?

The older software versions did not have the level Cycle 2 for ISO. Could you go to the following menu and let me know what is the software version?

<SHIFT> + <ESC> --> go to G-Code Side
<F7> -->...

The 8055 CNC manuals can be found in the following link:

Downloads | FAMA Technology

Please let me know what other specific information you may need.

The Error "Strange Character" suppose to be Error Number 105.

Could you please provide more information? How do you write your program? Through G-Code or conversational?

I would replace the 8025 with a new plug&play Fagor 8037 CNC. It would have the same front panel size with LCD screen, USB Connection and many more features such as look ahead (for smooth move on...

This link describes an step by step procedure to establish a TCP/IP networking with 8055 systems.

http://famatechnology.com/cms/wp-content/uploads/2014/05/network.pdf

8040 and 8055 are the same. Here is the file that you are looking for:

man_8055_inst.pdf

You can find it in the following link of FAMA Technology website.
...