502,539 active members
5,492 visitors online
Register for free
Login

Search:

Type: Posts; User: germanr

Search: Search took 0.00 seconds.

  1. Re: X Y axis calibration, engraving and circle cutting problems.

    Hello Albert.
    I ask you the following:
    Has the machine ever worked properly?
    If the answer is no. Did you install the configuration of the machine in the software? Did you read the machine from...
  2. Re: New 130 W co2 laser makes huge ring with dot in middle

    According to my experience the problem is that probably the power of the source that you have installed does not correspond with the power of the laser tube. Could you check that?

    Best regards
    ...
  3. Re: Ten-High Laser Engraver - Laser not firing, now arcing

    Hello! Obviously you have a loss in the high voltage cable. It is important to be able to discover if it is from the cable or from the tube.
    I recommend that you change the high voltage cable...
  4. Re: Custom jewelry maker new to laser and need advice please!

    Hello! You could see this BuchiCNC USA machine, it is bigger but if you look at the head it is more robust and the support service and after sales are great.

    Regards

    Mixed Laser Cutter XTM1390...
  5. Replies
    0
    Views
    57

    Re: Uneven cutting across the laser bed

    If you leveled the worktable correctly, it should be a problem of aligning the mirrors.
    If your machine does not cut in the whole right part (front and back) you should check the alignment between...
  6. Replies
    1
    Views
    50

    Re: Laser Cut a Wooden Spongebob Model

    It looks very good.
    It would be great if you shared the cut file in vectors for the community.

    regards

    I am an experienced laser technician.
    User of laser cutting machine Buchicnc EVO 14....
  7. Re: Laser perpendicular to surface? Distance?

    Hello,
    Normally the laser beam must be perpendicular to the material and must respect a distance to the material called focal distance determined by the focusing lens.
    There are laser cutting...
  8. Replies
    5
    Views
    73

    Re: Raising and lowering the bed

    Hi Rick,
    Is there a screw in any of the corners of the work table? Normally in this type of machines height regulation is manual.
    Could you send more photos of the machine?
    Does the machine have...
  9. Replies
    1
    Views
    76

    Re: What Software contoller to use

    Hi M-Wael
    You need to verify which controller you have installed. The most common Chinese controllers are: Leetro and Ruida.
    If you have a Leetro controller, the software you should use is...
  10. Re: Identifying stepper motor in order to replace

    If I understand the description of the problem, I recommend you to check the LaserCut configuration.
    It can be a configuration issue of the steps of the motors and the size of the working area.
    You...
  11. Replies
    2
    Views
    252

    Re: Bodo Lasercutter power and speed problem

    I leave this answer as teaching for new users of laser machines.
    Speed has nothing to do with mili Amperes. The amperes have to do with the power of cutting or engraving, which is measured in...
  12. Replies
    1
    Views
    40

    Re: Y-axis cutting quality

    Did you check the calibration of the mirrors? between the mirrors 2 and 3 is the calibration of the X axis. I think the problem may be there. Logically I am talking about an optical system with 3...
  13. Replies
    6
    Views
    66

    Re: Ruida Controller

    We use the RD6442 model in our machines are very good for CO2 laser cutting machines.

    we are:

    BuchiCNC USA

    You can check our CO2 laser cutters here:
    CO2 Laser cutting machines

    If you...
  14. Replies
    6
    Views
    66

    Re: Ruida Controller

    Hi Shearder,
    Grbl Controller is software that is designed to send GCode to CNC machines. It isn't super smart, it just needs to give the user a nice way to get commands down to whatever controller...
  15. Replies
    4
    Views
    408

    Re: 150 W RECI laser

    Hi Chuck!
    You can buy it on BuchiCNC USA:
    Lens for CO2 Lasers

    Best regards!

    German Rothar
    BuchiCNC USA

    You can check our CO2 laser cutters here:
  16. Replies
    1
    Views
    128

    Re: RECI TUBE SUPPLIER

    Hi Chuck!
    At buchiCNC USA we sell all kinds of supplies for laser cutting and engraving machines.
    I leave the links to the CO2 laser tubes:
    CO2 Laser Tube

    And for II-VI laser lens:
    II-VI...
  17. Replies
    2
    Views
    504

    Re: Issue with my Laser cutter..

    Hi.
    You could check that the controller is properly grounded. If it does not have good grounding it produces random errors until it ends up burning.
    The Chinese try to save on everything! sometimes...
  18. Replies
    0
    Views
    405

    Re: LASER Cutter Issue

    Laser Cut is proprietary software used by the Leetro brand controllers.
    Some Chinese manufacturers use it in their laser cutting and engraving machines.
    As Ray mentioned, there are also controllers...
  19. Replies
    3
    Views
    1,243

    Re: Leetro Mpc6525 dll version

    Hi.
    Normally that problem is caused by electrical problems in the machine that end up damaging the controller. We recommend you check if it is properly grounded. Not only the machine from its...
  20. Replies
    2
    Views
    457

    Re: RD Works V8.18.01

    The option of absolute coordinates is used so that the design cut is made in the exact position in which it is in the design software grid. It would be necessary to analyze more the design and the...
  21. Replies
    7
    Views
    433

    Re: Laser Engraver wont Engrave!

    Thank you Flor for your tip!
Results 1 to 21 of 21