584,830 active members*
5,513 visitors online*
Register for free
Login

Search:

Type: Posts; User: uli12us

Page 1 of 13 1 2 3 4

Search: Search took 0.01 seconds.

  1. Linear scale Y defective, it can be only a loose...

    Linear scale Y defective, it can be only a loose connector or a broken wire.
  2. Replies
    9
    Views
    1,234

    Another reason is, you can cast your rawpiece...

    Another reason is, you can cast your rawpiece near to the endshape of the die. That will save tons of material not only to buy as well to remove.
  3. Replies
    9
    Views
    4,881

    Try downloading this file. Siemens Industry...

    Try downloading this file.

    Siemens Industry Online Support - Automation Service, Automation Support, Simatic Service, Simatic Support, Technical Support, Technical Consulting

    All of the...
  4. Replies
    1
    Views
    741

    I only know 6RA drives from Siemens, they work...

    I only know 6RA drives from Siemens, they work with DC-Motors. Recently I have slaughtered a CNC-lathe with one of these Drives, but I fear its mach to big for your machine. It runs with 3~400V/63A...
  5. Replies
    7
    Views
    1,312

    On the first module left, you have iirc 6 little...

    On the first module left, you have iirc 6 little LEDs, there must be 2 lighted in green.
  6. Replies
    7
    Views
    3,420

    Although the thread is very old, at the moment I...

    Although the thread is very old, at the moment I throw away a CNC lathe with the above parts and try to sell the electric parts separately. The H002 VCU works on a Motor with 151V, 6Amps and the H003...
  7. The main changes are only in the wiring from the...

    The main changes are only in the wiring from the Euchner safetydoorswitch on the bottom of the case. What, if you try to change only the connectons from that switch. You unclamp the wire from clamp...
  8. Strange, I have switched on PM since I first came...

    Strange, I have switched on PM since I first came to this blog and don't changed it ever. Have you received my PM from yesterday?. Since you have a younger machine with a (not really) different...
  9. Replies
    2
    Views
    983

    IIRC the Cinci has a SCSI drive. Long time ago I...

    IIRC the Cinci has a SCSI drive. Long time ago I had a Problem with my old 68kApple and I tried to read it an a Silicon Graphics Indy (but the newer should do it as well) computer. This machine could...
  10. You need only the pages with the Pilz parts and...

    You need only the pages with the Pilz parts and the E/R Modul on it. I have the Nr 209:E/R, 215:Pnozv, 216:Pze5v, 219:PST3.
    Maybe one or two more, but I don't have my circuit folder here, right now.
  11. Replies
    1,100
    Views
    83,230

    If you want a complete change of all drives, then...

    If you want a complete change of all drives, then you can use step/dir as well as closed loop analog interface. Only if you want or must use the old hardware, you need the not so popular analog...
  12. Replies
    6
    Views
    650

    It were better if you take a small disc with...

    It were better if you take a small disc with 1/10" height to the end of the collet. The disc must not be bigger than your drillshank, a little bit (2 thou) smaller isn't bad.
  13. Replies
    1,100
    Views
    83,230

    Thanks pete, I will watch, what they can offer....

    Thanks pete, I will watch, what they can offer. Most of the I/Os is needed for the toolchanger and palletchanger. Each position is secured with a Bero, Ini, proximity switch or how the parts are...
  14. Replies
    1,100
    Views
    83,230

    Hi, Pete, have you more infos for the MEsa cards....

    Hi, Pete, have you more infos for the MEsa cards. I searched the HP, but found only a short description fpr each card, but not, what I need and in which combination all the cards working. I have the...
  15. Replies
    22
    Views
    4,059

    Calculating the angle is a simple operation, that...

    Calculating the angle is a simple operation, that everyone, who can use a lathe must know.

    If you can't this, you must draw it with a cad program and asked this for the angle.
  16. Replies
    15
    Views
    1,503

    Yes, its a setting screw to adjust the offset of...

    Yes, its a setting screw to adjust the offset of your tool, in some toolpresetters you can drive a the allen head with a long hexshaft from below, but on some collets you can have a thread on the...
  17. Replies
    22
    Views
    4,059

    A self manufactured toolholder can't never be...

    A self manufactured toolholder can't never be cheaper, than you buy one from a seller, who have these parts in stock. The only possible solution is, you make the parts by yourself.

    But I think, if...
  18. Replies
    22
    Views
    2,929

    Never use your fingers to polish inside parts on...

    Never use your fingers to polish inside parts on a lathe.
  19. Replies
    15
    Views
    1,503

    I use only ER16 Collets with an adjusting screw,...

    I use only ER16 Collets with an adjusting screw, behind the end of the collet. If your drill is in contact with the screw, it can't slip into the collet.
  20. Replies
    2
    Views
    509

    All people who gundrill I know, useing only non...

    All people who gundrill I know, useing only non soluble coolants with hp detergents. Its better for the tool, the workpiece, the machines. But a hp oil is much more expensive than a water soluble...
  21. Thread: Help to chose

    by uli12us
    Replies
    2
    Views
    1,126

    How many parts are you need. It makes a big...

    How many parts are you need. It makes a big difference, if we talk over 2 parts or 500.
  22. Replies
    10
    Views
    1,791

    On my computerscreen, the size of the threads is...

    On my computerscreen, the size of the threads is 16mm, if I think of gunparts I've seen before, I believe the parts have a maximum size of 6mm, so the length of the baseplate should be in the range...
  23. Replies
    13
    Views
    1,599

    Bamcnc, I prefer a bit bigger. The price of the...

    Bamcnc, I prefer a bit bigger. The price of the 10*22 lathes are not so much more expensive, but you can use it much better than the smaller parts. you have more room for the tools, a bigger spindle...
  24. Replies
    3
    Views
    363

    You can buy these sets from some not real premium...

    You can buy these sets from some not real premium sellers. If you have a router than I think you use it only for wood or plastics. In these case nearly all carbide endmill sets will do. But dont try...
  25. Replies
    8
    Views
    2,810

    Its not a good Idea to drive the spindle without...

    Its not a good Idea to drive the spindle without drive dogs, because the spindles are balanced with this part. If you run it at 3000RPM, then thats ok, but you want more than 15.000rpm. I have tested...
  26. Replies
    2
    Views
    1,015

    Maybe your encoder cables are defective, or the...

    Maybe your encoder cables are defective, or the connectors have a bad contact. The control watches, if all encoder connections are ok, if one of it dont work correctly, you get an alarm. But the...
  27. Replies
    10
    Views
    1,791

    I think 150$ for 1 piece can be realistic. For a...

    I think 150$ for 1 piece can be realistic. For a small 3axes cnc mill you have an hourly rate of under 50$. Thats nearly 3 hours plus material of maximum 5$. For the screws, I would simply cut of...
  28. Replies
    9
    Views
    526

    Normally, the manufacturer of the machine will...

    Normally, the manufacturer of the machine will sell the parts to you, but you must calculate in the range of 100$ per part. If you have only a vacuum clamping, then you can take a not to small...
  29. Replies
    1,100
    Views
    83,230

    Pete, maybe the update of firefox is your fault....

    Pete, maybe the update of firefox is your fault. I found out (for me) that the version 12 is much more stable than the followings. The 16 is nice with the hotkeys, but some sites don't work.
  30. I don't know the control, but the M3 M8 not on...

    I don't know the control, but the M3 M8 not on the same line is a bit confusing. Some machines, who have these "feature" allow a M13/14 for a spindle start with coolant on.
Results 1 to 30 of 365
Page 1 of 13 1 2 3 4