Search:

Hola WestEd tengo una máquina igual y puedo compartir los parámetros, deme un correo para enviar la información.

Greetings. A few days ago I have been working on repairing an Okuma Howa 438 Millac CMV with Fanuc 18 MA control, this machine works well when I do not raise the spindle RPM to more than 1666. When I...

Greetings. I know this post is old, but I find myself repairing an Okuma Howa 438v. Any information you have about this machine (parameters, manuals, advice) would be very useful. Thank you

Thank you very much for your help and I will be waiting for your message.

I'm sorry about the name, my language is not English, could you share with me the maintenance manual B-61805E/4, I was looking for this document and I can't find it, it would be very helpful for...

as Memorialista said, the problem was ram parity.

I had to reboot the system by pressing reset and delayt along with power on. followed by the 910 alarm.

I turned off the machine and turned it...

as memorialista said, the problem was ram parity.

I had to reboot the system by pressing reset and delayt along with power on. followed by the 910 alarm.

I turned off the machine and turned it...

greetings Memorial. From what I understand, can this plate A16B-2200-0900 be assimilated to mine A16B-2201-0080?

Greetings.
I am repairing a machine with Fanuc 18MA control, I feel that I am very close to solving all these problems that this machine has, but at this moment I am struggling with my...

Greetings.
I am repairing a machine with Fanuc 18MA control, I feel that I am very close to solving all these problems that this machine has, but at this moment I am struggling with my...

Greetings. I have an Okuma LB10 lathe with OSP 5000 control, a few months ago I had the same problem, the machine generated an amperage alarm on the z axis, the solution was to remove the control...

Hi Kirby, I know this is an old post, but at the moment the same thing is happening to me, I have a CMV Okuma Howa 438 with a Fanuc 18M control. The transmission worked fine a few months ago, but it...

Hello, I recently started to do maintenance on an Okuma Howa 438 machine with Fanuc 18M C series control, this machine has a problem of loss of Fanuc control parameters, the magazine does not work...