Search:

I was helping out a friend on his qt-6 with a tplus control. There was a ecsessive internal hydraulic leak in turret lock cylinder. Removed lock cylinder and replaced all O-rings. When putting turret...

When I suggested to my friend about posting on here. He will try if he can not up on the posting on forums thing. So I am still going to help him. I will get more info and try to upload a video on...

Ok. I will tell my friend to post but he is having problems with the company he bought the new machine from(not returning emails). I repair cnc machines and told him I will try to help him resolve...

This is a friends laser cutter and I am trying to help him out with the problem he is having. He has tried dealing with the company he bought the machine from but they are giving him the runaround...

I have not realigned a haas turret before. But from doing a lot of other machines(Hardinge, Clausing, Romi and Fryer) turret alignments. It sounds to me there might be something else holding it. ...

Sounds like your turret mounting bolts are not loose enought. I would get some one whose has done this before. Before you cause a bigger problem.

There is a guy named Bill on the eastern side of the USA that came from bridgeport when they closed up shop in the us. His number is (609) 685-8466. He should be able to help you he is a machine...

It sounds like the knockout switch is not working correctlly (control not getting finsh signal). There are two switches found under the cylinder on top of the spindle. 1 tells when the tool is lock...

Check to tool knockout switches. The switches that show that the tool retension is unlocked. The problem is in the tool change cycle. The control is waiting for a finsh signal from a switch. The...

could also be the locking fingers on the tool changing arm. When the arm drops and rotates. The arm will lock the tool from coming out of the pocket. If the pin that locks the finger is gumed/stuck...

I have no electrical prints for your machine. It sounds that there may be a loose connection. Check all connections in and out of the electrical cabinet. Also tell the model of EZ-PATH you have it...

I am new to this forum. I have recently started my own business(AUG. 2011) repairing/servicing machine tools(SWI, Accu-rite, Hardinge, Bridgeport and others). I am located in the Mid-Michigan. I am...

There is probly a motor contactor controling the coolant motor. Found in the electrical cabnet. do you hear any noise in the electrical cabnet when you turn the coolant on. Sorry if I spelled...

Thanks

[mahintek] Are you talkin about the end of drawbar. I have not seen many bt-40 taper machine and would like to know.

[Whyme] is correct It is the travel limits. You will need to do all axises X,Y and Z. It is easier to do Z with the front cover off so you can see the overtravel switches.

What model machine? Is it the newer VDI with a servo motor.

I am a machine repair tech in the USA. I do not have the electrical drawings either and also not formilar with this control. But there is a number of things that need to happen for a tool change to...

I am new to this forum. I know this is a cnc forum. But I thought I would ask. I have a old acu-rite millmate dro that I am going to install on my bridgeport mll.I need the reader head alignment...

does this machine have a umbrella type atc or a swing arm. there is some times a prox switch that needs to be made it is usally found on the rotating part of the spindle by the belt. these are used...