Hello all. Opened photo vcarve today and when I picked the photo I wanted to mess around with it came up as a black screen . Anyone have any idea on how to fix this.Thanks
Type: Posts; User: corrie
Hello all. Opened photo vcarve today and when I picked the photo I wanted to mess around with it came up as a black screen . Anyone have any idea on how to fix this.Thanks
https://www.amazon.ca/SODIAL-Controller-Digital-Display-Switch/dp/B01HLRSIGM/ref=sr_1_19?ie=UTF8&qid=1491060563&sr=8-19&keywords=pwm+motor+speed+controller I was looking at this but not sure if it...
:)Thanks ill look into it
Here is the motor357016
Thanks John I'm just glad all is running well . I tuned in the motors as well and sounds nice. The spindle I'm using is one of those brushed motors with a red and a black wire coming off the top.It...
Hello all. Well i got the motors running now. Ran one wire from vcc to second chinese symbol one from pulse to pin? And one wire from dir to pin? And all worked out. Now time to tune motors nema 17s.
My drivers dont show a+ puls or a + dir thats why im confused sorry for the frustration
John i ran the vcc to+5 and got iso light to come on ran a wire lets say green to pin3 and the purple to pin2 set that in mach tried to jog and heard one step only. Tried the green on pin 1 but iso...
Thanks for the replies i will get to it this evening. Can i daisey chain the vcc then one wire to +5 volts at the bob or run three seperate wires? Thank you once again gentlemen for the responces.
Ok here is what i got for the driver. Pul is stepping pulse dir is motor direction vcc power supply port for optical copling and en is for mottor free. Does the vcc get connected to anode on the bob?...
Thanks Russ but I have no documentation for this driver and I have done endless internet search. The drives are powered on the dc side of driver but I'm thinking that they are not getting the power...
I'm sure that's all is needed to power bob. the three wires to the left have been changed to orange anode green 5 purple 6, green dir purple pul and orange vcc from driver.very frustrating without...
hi all ,ok my drives are jk0220 and the connections read like this.pu-dir-vcc and enable those are the only connections.356586356586. I have a 5 axis Chinese breakout board and I'm pretty sure that...
Hello i have that same breakout board but confused on wireing . my drives are the jk0220 drivers anyone got a idea. Thanks in advance.
Thanks for your help Al. Here are some pics not done yet.
355682355684355686355688355688355690355692355694
I dont think ill control tbe spindle Al. Here is the estop switch, it has two sides the red and green do i connect straight through on the red or the green im a little co fused or second guessing...
Here is a pic with estop 355512
355448layout so far. Im thinking motor connectors directly above drivers. And pp north of drivers. Still need estop.
Thanks Al will do.
Thanks Al now coming from a newbie to all this does the estop get wired inline on the white side. This is one of the components i did not look into. Thanks
Could someone have a peek at this please. I posted earier but not sure if it went through.Thanks.
Hello all. I recently bought a small desktop type router from linksprite cnc . it came with nema 17 size motors and a all in one arduino board running grbl. Im not loving the grbl setup and would...
Thanks looks like I may have to go back to original collets just too much runout on them
Thanks for the info, would be great if I could find just a 3/8 er11.
Would anyone know where I could get er collets and nut to fit my Bosch 1617 eves router I already have er 11 that fits 1/8 and 1/4 but need a 3/8 collet . I'm willing to switch to a different size...
Thanks a bunch switcher, realy appreciated.
Anyone have a dxf of the world map,thanks in advance
hello all, looking for a dxf of the world map any help would be appreciated, thanks in advance.