Search:

Hey friend,

HAVE YOU SOLVED THIS ISSUE.

SHEKAR

Hei Friend,

Could you please be more specific about the problem.

1.Are you able to create ISO program in the machine like when you want to create a new program are you getting the ISO/EIA and...

Hi Friend,

You have to go into privilege mode by typing 1131.

You can access options installed like EIA/ISO, Y-Axis,Macros etc which will be highlighted by yellow color( or some color).

If...

Dear Friends,

We have two numbers of Mazak ST40 ATC with T32 controller. Both machines are having ISO OPTION.

Though the machines are running beautifully with Mazatrol program we are not able...

Dear Friends,

We have two numbers of Mazak ST40 ATC with T32 controller. Both machines are having ISO OPTION.

Though the machines are running beautifully with Mazatrol program we are not able...

HEI FRIENDS,

WE HAVE FEW MAZAK MACHINES AND OUR OPERATORS ARE WELL VERSE WITH MAZATROL PROGRAMMING.

IN ONE OF OUR ST40 INTEGREX WITH T32-3 CONTROLLER IT HAS ADDITIONAL OPTION EIA/ISO...

Dear W.M.E,

If your machine is ST40 then the turret is having two positions one V and the other is H.

They are called packet 1 and packet 2.

In tool data please check whether you have...

Dear Friend,

You are not specific in hi-lighting the problem.

1. When you press the C- AXIS I/O push button you can see the C-AXIS gear engage/dis engage operation.

Is it happening?

2.You...

HEI FRIENDS,

WE HAVE FEW MAZAK MACHINES AND OUR OPERATORS ARE WELL VERSE WITH MAZATROL PROGRAMMING.

IN ONE OF OUR ST40 INTEGREX WITH T32-3 CONTROLLER IT HAS ADDITIONAL OPTION EIA/ISO...

HEI FRIENDS,

WE HAVE FEW MAZAK MACHINES AND OUR OPERATORS ARE WELL VERSE WITH MAZATROL PROGRAMMING.

IN ONE OF OUR ST40 INTEGREX WITH T32-3 CONTROLLER IT HAS ADDITIONAL OPTION EIA/ISO...

Hei Friend,

Is this machine is with Mazak T32-3 controller and if so is it equipped with dedicated ATC drive like Mazak position sequencer.

And you have not provided the alarm no etc.

SHEKAR

Thanks a lot for the information

SHEKAR

Is there any one to one replacement available for the SUMTAK OPTO CODER , MODEL LEC-72-BM-S38.

This OPTO CODER is used for ATC and ROTARY TABLE in the Mazak machines.

Thanks

SHEKAR

Please check maitenance check data

Hey friend ,

Please cross check the parameters you have entered.

The alarm is related to due to wrong input defining the stroke end type

SHEKAR

SEND ME YOUR MAIL ID

SHEKAR

May be you can check the spindle pulley belts or the encoder timer pulley belts for slipping.




Regards
SHEKAR

Hi Pcreek,

You have not mentioned what alarm you were getting while switching on the machine

Hello Friend,

The tool change position is decided by the parameter P17 and you can set from 1 to 8 depending on your requirement and before doing any changes always note down the original value...

HEI FRIEND,

CHECK MACHINE DATA 408 BIT 4 & 6 AND IF THEY ARE 1 CHANGE TO 0

SHEKAR

Hei Friend,

First you ensure that the ATC is working properly as it is being controlled by a dedicated board developed by DYNA.

We have a DYNA 4400M with same controller but not with 4th axis...

HELLO FRIENDS,

WE HAVE A CITIZEN M20 WITH MELDAS 500 CONTROLLER.

IT HAS GOT A TURRET AS A-AXIS WHICH IS MOUNTED ON Z2-AXIS AND CAN ANY BODY HELP AS HOW TO CALL THE TOOLS FROM THIS TURRET IN MDI...

Dear Friend,

Please check the encoder cable for any damage going to the SF-TL CARD (which is a small card mounted ).Check for the 5v from the NC side.Also check whether the encoder is faulty or...

Dear W.M.E,
You have not mentioned the machine whether it is ST28/25/35.

o.K.

As for as CAMT3 is concerned there is as such no parameter for changing the language.
The language option comes...

HEI FRIEND,

PL CHECK THIS R54 BIT 0 PLC PARAMETER.

IF IT IS 0 MAKE IT 1.

THE PAGE WILL BE 9 PAGE OR SO AND YOU CAN GO TO MACHINE PARAMETER SCREEN AND SCROLL FOR THIS PAGE.

IT WILL BE LIKE...

HEI FRIENDS,

WE HAVE BOUGHT ONE PHOTO ELECTRIC SENSOR FOR OUR MAZAK MACHINE NPN-NO BY MISTAKE .(ACTUALLY IT SHOULD BE PNP-NO.)

HAS ANY BODY EVER TRIED TO CONVERT A NPN-NO IN TO PNP -NO BY...

HEI FRIEND,,

GO TO DIAGNOSTIC MODE AND CHECK THE OPTION SCREEN.

EIA IS AN OPTION.IF IT IS INSTALLED YOU CAN SEE THE EIA OPTION WITH HIGHLIGHTED.

SHEKAR

HEI FRIEND,

MOST OF THE MAZAK MACHINES WITH T32 CONTROLLER WILL HAVE R-PARAMETERS FROM R49 TO R72 IN BIT FORMAT AND EACH BIT FOR DIFFERENT OPTIONS/FUNCTIONS THAT HAVE COME ALONG WITH THE...

HEI FRIEND,

CHECK THE PARAMETER R59 BIT 6.

IF IT IS 0 MAKE IT 1.

SHEKAR

We have two machines Mazak with One T32B controller and the other T32-2 controller.

Is the CPU MC116 is identical/generic card or will it be ok if we change only the EPPROMS.

There are few more...