Search:

Hello,

Happy New Year for all !

Ok Steve, I did'nt see this area ! I'm faulty.
On the schematic pin 1 is not connected so ....

But it is not really important, you are providing a good PCB...

Hello Steve and others,

I will try using your process, for finishing gear cutting.
About MCLR, following your schematic, I started with non connected, and produced erratic reset and non reliable...

Hello,

I have started playing with your software and I can say that it is really excellent.
I have to spend some time to adjust speed and acceleration parameters, to avoid step loss.
Any...

Hello Kwackers,

It is a good new !
Don't apologies, it is interesting to debug also the schematic....
Next friday I will quickly reverse resistors, to GND, and after I hope that I could go...

Hello Kwackers,

This morning I wake up earlier to load your keyboard test in the 18F452, before taking the plane to UK.

First remark, all keys are working !

Second remark, no key pressed,...

Hello Kwackers,

Pin 2 of the CPU seems to have no effect on my problem, I have fitted a 10k to GND to be sure.
When I press one of the three left upper keys, I got 2 bips, but the result on the...

Hello Kwackers,

With a 10k pull-up resistor on MCLR, now the reset is working fine.
But, I'm still locked in the profil menu.
Just an idea, the eeprom memory is empty, because I never save...

Hello Kwackers,
Thanks to have a look on my problem.
Resistors are present, but SMD, it is one of the reason why I have changed your layout.
I will try what you say about MCLR.
Now, after a lot...

Hello Kwackers (and others..)

Thank you very much for your's configuration bits.
I don't like really using breadboard, and designed/etched quickly a PCB (Eagle).
With a good configuration bits,...

Hello,

Pictures about my hardware, which is not working is not a good idea.
I am very interested with this thread, because my rotary head hardware is quite completed now, and I was writing the...

hello,
I have completed the component installation on the PCB, but I have some difficulties to start.
Using a brand new 18F452, I have used the HEX file with IcProg 1.06A, but about Config bits ? ...