584,800 active members*
4,687 visitors online*
Register for free
Login

Search:

Type: Posts; User: chartwar02

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    928

    Re: Undersized Tapped Thread

    Jim, that article was really helpful! The customer requires a 3B tolerance. I'll hunt down a larger "H" limit and see if that helps.
  2. Replies
    3
    Views
    928

    Undersized Tapped Thread

    I'm threading a high silicone cast aluminum using a Guhring 1/4-28 UNF STI 3B Modified Bottoming TiN coated tap about 7/8" deep. I'm using the same type of tap (5/16-24 and 10-32) with no issues....
  3. Really Random 1/4" x .03 Corner Rad. 4FL AlTiN coated End Mill Breaking!

    For over a year now we've had this end mill randomly break. This end mill runs 200+ parts cutting four .30 wide slots, .30 deep per part using a trochoidal tool path. It's currently running at...
  4. Re: Setting G54, G55, and G56 offsets with the CS

    Open up your CS. By default there should only be XY plane. I like to relabel it as G54. Create a new CS. Again, label the new CS as G55. With the G55 CS selected, open up your CS pallet located...
  5. Turn/mill between spindles Mazak i-200S Matrix II

    I'm trying to turn and mill between spindles on a Mazak Integrex i-200S. I can use M511 for both but when I go from a turning operation to a milling operation, my C and U axes lose synchronization...
  6. Replies
    4
    Views
    2,184

    I have been goofing around with the MDD editor. ...

    I have been goofing around with the MDD editor. I played around with the different coolant options and adding multiple selections. Unfortunately I didn't see anything that would allow me to define...
  7. Replies
    4
    Views
    2,184

    Looks like I'll need to get me that Compost...

    Looks like I'll need to get me that Compost program. I've found the "coolant 8 9 7 on, off & mist m code" line. I'll try changing it to what I want. We have machines that have more than two...
  8. Replies
    4
    Views
    2,184

    New Coolant Options

    Hi everyone!

    I'm trying to add different coolant options. I've figured out how to add the options you may use when programming a tool path, but the code is still processed with M8's no matter...
  9. Replies
    3
    Views
    3,710

    In GibbsCAM, go to: File Preferences... File...

    In GibbsCAM, go to:

    File
    Preferences...
    File (Tab)

    Under File Extensions, you can change the Post: from NCF to EIA. Now every time you post, it will automatically post as an EIA.
    I was...
Results 1 to 9 of 9