Hello
I also use the stamos 85a. I have had the same problem and help to change the nozzle.
Lakijano did you bay a new torch? Whose production and where?
Type: Posts; User: virx1
Hello
I also use the stamos 85a. I have had the same problem and help to change the nozzle.
Lakijano did you bay a new torch? Whose production and where?
Hello
I have the same problem.
I've tried Windows Vista, Windows 7. still be simulated alarm "Warning: WARNING: Feed rate is zero
Post processing completed with 1 Warning "
g code is not be...
Thanks Thortchead. Turn off and is currently operational. :)
I have a 4 pin. 2, which will pull the trigger and that is now connected to the Controller relay output. the other two are the ones where the voltage of the torch. So I have to pair the arc ok signal...
I think that if it is a signal to let the CNC Controller then it explodes :)
There's about to be 145V and more.
Currently Proma simply connects the input that I have as determined by the ARC OK
CNC connector i took signal for Proma for thc.
And if you shut down the torch voltage is still there for some time. That's the problem for arc ok signal.
wondering it relays the relay which is located under the Controller and connect the wires that make the plasma cutter to work (trigger wires)
I changed the tip torches still the same.
It does not matter whether you cut from the top down or the bottom up. y axis is always tilted right side. The left edge almost straight. x axis cutting...
This arc ok I'll have to look into the inside of the plasma cutter maybe I can take a signal from somewhere.
Today I tried to do a test to find the cutting speed and amps.
What might be wrong?...
It is a good idea. I have somehow take signal arc ok in torch relay.
if the arc ok is not active whether THC stops working?
If I turn off the torch then the ARC OK signal will lasts until the fall 20v
Mach3 thinks that the torch burns, although I'm turned off thorch.
Do you disappears immediately voltage in the thc...
how fast and what amp you are cutting 3mm iron. ja Do you can see what you are cutting volts ?
224038
224036Hello
Ordered a new Proma THC controller. When the torch goes out then the the voltage for a while, to controller and Mach3 adjusts the height.
Does anyone have a problem with that?...
Greetings to all.
Thanks for the hints.
I have researched the Internet 1.5 days, and I have become aware that an error has
My G-code. G20.1 is a particular need to add a value of the Z axis....
Greetings from Estonia, and I'm sorry in poor English language.
Building a new CNC Plasma. YouTube is a video where the torch goes against the material, and then rises up and will arson.
Home...