Search:

Were the first hole goes into the second hole from the side. Can i de burr that part of the hole with a lolly pop de bur tool?
And for what ever reason, the site, wont let me load a onecnc file?...

the shop we used back east(USA), closed. so now we cant find anyone.
any help would be great.
thanks,
ron

would help to know were you are located...

i like using varimills and run them at the suggested speeds and feeds. i would use 1/2 4 flute with champer corners. about 3800 rpm and feed of 38 ipm, about .3-.4 doc... works well. then i would use...

i usally tap around a 1000 rpm. and my threads are fine. i have not heard anything good about the update after 1030???? good luck man.
o, also know. all the dip sticks that designed the new software...

4-40, M3, M4, M6, 1/4-20, All good. i have a vf3 ss, and a vf3 ss yt, no problems on either one so far.... what version software are you on?

ours are tapping fine. we are on version 1030 with the probe patch. everything is working, still getting used to all the new stuff. the next gen will NOT do a g13 with I-. so we have to change our...

im sure the tech checked. but you have a setting, that tells the machine how fast to retract. 1,2 3 etc faster retract. on my older haas's we tap around 1500 all day. i know we did some 1/2-13 in...

it was already here. it works well for everything i do. if i was to by one i would buy something smaller, with out the tail stock. ive been here for 2.5 yrs and have never used it. lol

tight tolerance odd shaped groove, using a vnmg. so .002 is conservative and trouble free.

adding the z to the N40 line worked. going to mess with onecnc and see if i can manipulate it. to spit out the right code.
thanks for the help boyz
ron

thanks bud, ill try that in the morning. wonder why onecnc puts it like that, lol

i am just not seeing what the damn problem is??????????????????????

here is the program that it is alarming out on. any help would be great. and this is genarated straight from...

moderator, this item has been sold. can you please close this thread
thank you

im making my parts from billet 1018. im going to ruff the tapered hole stair steeped and then finish the hole using g13's

are you using them like a reamer? or are you interpolating?

going to go with award tool .5 small od. 1.25 loc carbide tialn coated.
anyone think if i stairsteep the hole with a ruffer before running the carbide, i could get better tool life?
and blast with...

what tools are you guys using to cut your taper for ball joint holes in steel? hss 5 degree tappered endmill is just not lasting. anyone use a insert cutter?
1.0" small id, 1.3" big id. ive been...

thanks man, ill try that.

bump for help

lol. thats like warning lables that you see. someone has done it and hurt them selves. like the blue towel despenser. do not insert head in towel, could cause injury or death. lmao

your right. the tech did change something for me. how are us old school machinist suppose to set up are machines if we cant put our head in the machine. lol

also if a tech comes out for service, he is required to put the latches back to stock. a very annoying feature that was added for sure. also if you get inspected by the state, it could be a big fine....

i know this is a hella old thread, but bring this one back, verses starting a new one. have problems getting good finish on face of part. i have followed suggestions from here, and im close. ok...

what doc? i use a 1/2 3 flute iscar chatter free, or helicoil brand. i run s10680, feed of 70. .525 doc full radial engagement. best bet is to start with the manufactures start point, and increase...

depending on what you are trying to accomplish. indexable tooling seems to work best for me. then finishing with 5 flute endmills

try overlapping more, and you could try going the same direction. also try 3 or 2 flute end mill.

ok. purchasing has got a hold of some of you, so were good to go.
thank you for all the pms.
later,
ron

moderator can you please lock this thread. thanks

agreed on lista. kinda pricey but well worth it, i order more once a month.

and of course. everyone is at sema this week. you will get responses to your pms when they get back.
thanks everyone